LPD Belize Solid Core Internal Door - Brown - PFOBEL21

While it is an internal door, it is best suited for rooms with moderate humidity. Prolonged exposure to high moisture levels is not recommended. Consider additional sealing if used in such environments.

The door comes pre-finished. While it's possible to paint or varnish over it, it would require proper surface preparation (sanding, priming) and may alter the intended aesthetic.

Standard internal door hardware, including hinges, handles, and locks, is compatible. Ensure the hardware is sized appropriately for the door's thickness and weight.

Measure the height and width of the opening at its widest and tallest points, and also measure the depth of the wall (the door lining thickness). The LPD Belize door is 1981mm high and 533mm wide, but ensure your opening accommodates these dimensions.

Yes, the door is finished on both sides with a consistent oak veneer to provide a uniform appearance.

Solid core doors are significantly heavier than hollow core doors due to their construction. Specific weight can vary, but expect it to be substantial, requiring sturdy hinges and potentially two people for installation.

Check if the door frame is square and if the hinges are properly aligned. Minor rubbing may be resolved by careful sanding on the contact point, followed by sealing the edge.

Gently clean the affected area with a soft, damp cloth. For minor scuffs, a specialized wood cleaner or furniture polish suitable for oak veneer may be used. Avoid harsh chemicals.

Ensure the door is properly seated in the frame with minimal gaps. Check that all edges are sealed and that there are no unintended openings around the frame or door.