Deco Art Americana Decor Color Stains - Garnet
Best current price£11.82from Go Craft
Best offers
Shopping.co.uk recommended and popular offers
Go Craft£11.82Visit shop DecoArt Garnet Colour Stain
Visit shopGo Craft£11.82Visit shop One Offer
1 offer from £11.82
View price history by clicking the chart icon.
Product Information
Full details
This guide is for DIY enthusiasts and crafters looking for a durable, easy-to-use finish for both indoor and outdoor projects. The Deco Art Americana Decor Color Stains in Garnet offer a semi-transparent, water-resistant coating that combines staining and sealing in one step, utilizing water-based, non-toxic, and light-fast pigments. A key benefit is its versatility across various surfaces, though its semi-transparent nature may require multiple coats for deeper color saturation.
All features
| Colour | Red |
|---|---|
| Model Part Number | ADCS06-36 |
| Brand | DecoArt |
Extended Product Information
FAQs
Can I use this on a tabletop?
While durable, it's not rated for heavy abrasion or constant direct food contact. For tabletops, consider an additional topcoat of a dedicated sealant like a polycrylic or polyurethane for maximum protection.
How many coats do I need for full coverage?
As a semi-transparent stain, it's designed to allow the underlying material's grain to show. For a deeper Garnet color or more opaque look, you will likely need 2-3 coats, applied thinly and evenly.
What is the drying time between coats?
Typically, allow 2-4 hours of drying time between coats, but this can vary based on humidity and temperature. Ensure the surface is dry to the touch before applying the next coat.
Can I paint over this stain and sealer?
Yes, once fully cured, you can paint over the dried stain and sealer. Ensure the surface is clean and dry before painting.
Is this product suitable for direct contact with food?
No, this product is not intended for direct food contact surfaces. It is suitable for decorative items and furniture.
How do I clean up brushes and tools?
Clean all tools and brushes with soap and water immediately after use while the product is still wet.
Will the color fade in direct sunlight?
The product uses light-fast pigments, which means it is resistant to fading from UV exposure, making it suitable for outdoor use.
Troubleshooting
Color appears too light
Apply additional coats of the stain and sealer, allowing adequate drying time between each coat.
Streaky or uneven finish
Ensure the product is thoroughly stirred before application. Apply in thin, even coats, working with the grain. Wipe off any excess stain evenly.
Product is difficult to spread
Ensure the surface is properly prepared and dry. Stir the product well. If it's very thick, a tiny amount of water can be added, but use sparingly to maintain sealing properties.
Finish remains tacky after drying
This can occur in high humidity or if applied too thickly. Ensure adequate ventilation and drying time. If still tacky after 24-48 hours, lightly buff with fine-grit sandpaper and apply a very thin additional coat.
Pros and Cons
Pros
- Combines staining and sealing into a single step.
- Suitable for a wide range of indoor and outdoor projects.
- Water-based and non-toxic formulation for safer use.
- Fade-resistant pigments ensure long-lasting color.
- Enhances natural material textures with a semi-transparent look.
Cons
- Semi-transparent nature may require multiple coats for opaque coverage.
- May not be suitable for non-porous surfaces without proper preparation.
- Requires adequate drying time between coats for best results.
- Color may appear different on various wood species.
- Not intended for direct food contact surfaces.
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and free from grease, wax, or old finishes. Lightly sand any glossy surfaces to create a better bond. Stir the product thoroughly before use; do not shake.
Compatibility: This stain and sealer is ideal for unfinished wood, previously painted or stained surfaces (after proper cleaning and prep), concrete, and other porous materials. It is not recommended for use on metal, plastic, or surfaces intended for direct food contact. For best results on very porous surfaces, a pre-sealer might be beneficial, though not always required.
Care: Clean application tools (brushes, rollers) immediately after use with soap and water. For the finished project, wipe with a damp cloth and mild soap if necessary. Avoid abrasive cleaners. Allow the finish to cure for at least 72 hours for maximum durability before heavy use.