Underseal Spray Black Underguard Paint - Car-Pride - 400ML

Coverage depends on the thickness of the application. One 400ml can is usually sufficient for a single application on a medium-sized car's underbody.

It is best to remove as much rust as possible before applying. The product can help prevent further rust from forming.

No, priming is not typically required. Ensure the surface is clean and dry.

Drying time varies depending on the conditions, but it typically dries to the touch within a few hours. Complete curing may take longer.

Yes, it is generally safe to use on plastic components, but always test in an inconspicuous area first.

Apply in warm, dust-free conditions, ideally between 15°C and 25°C.

Store the can in a cool, dry place, away from direct sunlight. Ensure the nozzle is clean after use.

Ensure the surface was thoroughly cleaned and dried before application. Reapply after proper preparation.

Shake the can well before and during use. Apply in even strokes.

Clean the nozzle after each use. If clogged, try using a pin to clear it.