Tile Leveling System Kit - 1.5mm

The system is designed for tiles with a thickness ranging from 1/16" (1.5mm) up to 1/2" (12mm).

No, the kit includes a specialized tile plier, and the clips and wedges are designed for tool-free installation and removal (apart from the plier for tightening and breaking).

The wedges are described as reusable, but in practice, they are often broken off after use to remove them. The clips are also typically removed after the mortar sets.

Yes, this tile leveling system is suitable for both flooring and walling applications.

The kit includes 300 leveling spacer clips and 100 reusable wedges.

The tile plier is used to clamp the wedge and clip together, providing the necessary leverage to tighten the system and level the tiles. It also helps in breaking the wedges off after the mortar has set.

Once the tile mortar has fully set, you typically tap the edges of the wedges to break them off, or use the plier to gently pry them loose. The clips will then be free to remove.

Ensure clips are placed correctly under the tile edges and are fully engaged. Re-apply pressure with the plier, ensuring it grips the wedge firmly. Check for debris under the tiles or clips.

Ensure the clips are not bent or damaged. For removal, tap the wedge firmly at its base or use the plier's head to gently pry it loose. If inserting is difficult, check for obstructions.

Avoid over-tightening. The plier should provide sufficient tension to level the tiles without excessive force. Ensure the clip is fully under the tile and not snagged on anything.

Ensure the wedge is properly seated in the clip and the plier jaws are clean and free of mortar residue. Adjust your grip on the plier handle for better leverage.