Best current price£53.33from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£53.33Visit shop Draper 45011 Mt2 Geared Chuck Each
Visit shop
B&Q£69.57Visit shop B&Q - Mt2 Geared Chuck160mm 45011
Visit shop6 offers from £53.33 - £73.98
View price history by clicking the chart icon.
This Draper MT2 Geared Chuck is designed for users needing secure and precise tool holding with MT2 tool mounts. Its primary benefit is the reliable grip provided by its geared mechanism, ensuring tools remain firmly in place during operation. A potential caveat is its specific compatibility with MT2 tapers, requiring users to ensure their equipment uses this standard.
| Model Part Number | 45011 |
|---|---|
| Brand | Draper |
MT2 stands for Morse Taper 2, a standard size for tool holders and spindles used in metalworking machinery like lathes and milling machines.
No, this chuck is specifically designed for MT2 tapers. For other spindle types, you would need an adapter or a chuck with a different mounting system.
It is recommended to lubricate the chuck's gears and jaw mechanism every few months, or more frequently if used in dusty environments or under heavy load.
This geared chuck is suitable for holding various rotary tools such as drill bits, reamers, and small milling cutters that fit within its jaw capacity.
Insert the chuck key into one of the geared openings and turn clockwise to tighten. Turn counter-clockwise to loosen. Use firm, even pressure for a secure grip.
Yes, geared chucks are typically self-centering, meaning all jaws move in unison to grip the tool centrally.
Ensure the tool is fully inserted into the chuck jaws. Clean any debris from the jaws and the tool shank. Check that the chuck key is fully engaged and tightened appropriately. If the issue persists, the chuck jaws may be worn.
Inspect the chuck for dirt, chips, or rust. Clean thoroughly and apply a light lubricant to the gear mechanism and jaw slides. Ensure the chuck key is turning smoothly within the keyholes.
Ensure the chuck is properly seated in the MT2 spindle. Check for damage to the MT2 taper on the machine or the chuck's mounting shank. If damage is present, professional repair may be needed.
Setup: To install the Draper MT2 Geared Chuck, ensure the MT2 spindle on your machine is clean. Insert the chuck shank into the spindle taper and twist slightly to engage. Secure it according to your machine's specific mounting instructions, which may involve a drawbar or locking mechanism.
Compatibility: This chuck is designed exclusively for machinery with an MT2 (Morse Taper 2) tool mount. Verify that your lathe, milling machine, or drill press utilizes an MT2 spindle before purchasing.
Care: Keep the chuck clean and free from debris. Periodically lubricate the gears and key mechanism to ensure smooth operation. For cleaning, use a dry or slightly damp cloth. Avoid abrasive cleaners that could damage the finish or internal components.
