Laser Tools Special Socket MB30 x 60mm - for Mercedes-Benz - 7810

MB30 refers to a specific size designation for bolts commonly used on Mercedes-Benz commercial vehicle chassis.

Yes, as long as the ratchet has a 3/4" drive output. It is also designed for use with impact wrenches.

This socket is specifically designed for Mercedes-Benz *commercial* vehicles and their chassis bolts, particularly for fifth wheel applications. It is not intended for passenger cars or other non-specific chassis bolts.

Clean the socket after each use with a dry cloth. Store in a dry place. The chemical blue stain finish offers good corrosion resistance.

The 60mm length provides extended reach, which is often necessary to access recessed or difficult-to-reach chassis bolts on commercial vehicles.

While it is impact-rated and can be used with impact wrenches, it can also be used with a 3/4" drive torque wrench for applications requiring precise torque values, provided the torque wrench is suitable for that drive size.

Verify that the bolt is indeed an MB30 size. Ensure no debris is obstructing the socket or the bolt head. This socket is specifically for MB30 bolts and will not fit other sizes.

Check for wear on the bolt head or the inside of the socket. Ensure the socket is fully seated onto the bolt head. For severely worn bolts, a bolt extractor might be necessary.

Inspect the socket for cracks or excessive deformation. If damage is present, cease use immediately to prevent further tool or fastener damage. Contact the retailer for warranty information.