Best current price£1,693.74from B&Q
Shopping.co.uk recommended and popular offers
B&Q£1,693.74Visit shop B&Q - Megaflo Eco Systemready 125Sb Indirect Unvented Hot Water Cylinder 95050497
Visit shop1 offer from £1,693.74
View price history by clicking the chart icon.
The Heatrae Sadia Megaflo Eco SystemReady 125SB Indirect Unvented Hot Water Cylinder is designed for homeowners and installers seeking an efficient and high-quality hot water solution for central heating systems. Its primary benefit is the pre-plumbed design, significantly reducing installation time and complexity. A potential caveat is its 125-litre capacity, which may be insufficient for very large households or high demand scenarios. This 3kW cylinder offers robust performance and is ideal for use with system boilers, ensuring reliable hot water delivery and enhanced system integrity.
| Model Part Number | 95050497 |
|---|---|
| Brand | Heatrae Sadia |
The SystemReady design means the cylinder comes pre-plumbed, significantly reducing installation time and complexity for the installer.
No, this indirect unvented cylinder is specifically designed for use with system boilers. It is not typically suitable for combi boilers or conventional boilers without modifications.
This model, the 125SB, has a capacity of 125 litres.
Yes, installation of unvented hot water cylinders must be carried out by a qualified installer holding a recognized unvented hot water systems qualification.
Heating time depends on the primary heat source (system boiler) and the 3kW immersion heater. Consult the product manual for specific recovery times under different conditions.
Regular visual inspections are recommended. Periodic checks of the T&P valve by a qualified professional are important. Refer to the manufacturer's manual for detailed care instructions.
While primarily designed for central heating systems, its compatibility with underfloor heating would depend on the specific setup and integration with the system boiler. Consult your installer for suitability.
Check the primary circuit from the system boiler is functioning correctly. Verify the 3kW immersion heater is powered and switched on if used for supplementary heating. Ensure the thermostat is set correctly. Check for any blockages in the hot water draw-off.
Adjust the thermostat on the cylinder or the boiler's output temperature. If using an external mixing valve, check its settings. Ensure the primary flow rate from the boiler is adequate.
Immediately turn off the water supply to the cylinder and contact a qualified installer. Do not attempt to repair leaks yourself. Check that all connections are secure and that the cylinder itself is not damaged.
This could indicate expansion issues, high water velocity, or scale build-up. Have a qualified installer check the system for correct pipe sizing, flow rates, and potential issues with the expansion vessel or safety valves.
Setup: The Megaflo Eco SystemReady cylinder is designed for ease of installation with its pre-plumbed connections. However, installation must be carried out by a qualified installer holding an unvented hot water systems qualification. Ensure the cylinder is installed on a solid, level floor and that all pipework and electrical connections are made according to the manufacturer's instructions and local building regulations.
Compatibility: This indirect unvented cylinder is specifically designed for use with system boilers. It requires a suitable power supply for the 3kW immersion heater and must be integrated into an open-vented or sealed central heating system. Ensure your existing system can accommodate an unvented cylinder and its associated safety controls.
Care: Regular maintenance is crucial for optimal performance. Visually inspect the unit periodically. For detailed cleaning instructions, refer to the manufacturer's manual. Avoid harsh chemical cleaners. Periodically check the temperature and pressure relief (T&P) valve to ensure it is free from scale and operates correctly; this should be done by a qualified professional.
