Hammer Wedge Set - AB Tools - TE837

This set includes 10 hammer wedges, with two wedges each of sizes No. 1, 2, 3, 4, and 5.

These wedges are designed for securing hammer and mallet heads to replacement handles. They are suitable for most standard tools with a wedge slot.

Select the wedge size that most closely matches the width and depth of the slot on the hammer or mallet handle. It should fit snugly before being driven in.

It is generally recommended to use a new wedge for reassembly, as the original wedge may have deformed slightly during insertion. Reused wedges may not provide as secure a fit.

This can happen if the wedge is too large for the slot or driven with excessive force. Ensure you are using the correct size wedge and apply steady, firm pressure rather than brute force. If the handle is old or dry, it may be more susceptible to splitting.

These are typically metal wedges designed for durability and effective securing power.

Ensure you have selected the correct wedge size that fills the slot adequately. Try a slightly larger wedge if available, or ensure the wedge is driven in completely. Check that the handle itself is not cracked or compromised.

Confirm the slot is clean and clear. Ensure the wedge is aligned correctly within the slot. Gentle tapping may be needed initially, but excessive force could damage the handle or wedge.

Verify that you are using the correct size wedge for the handle slot. The set includes multiple sizes; try a different one. The handle slot might be non-standard if none of the included wedges fit properly.