Everbuild Jetcem Quick Set Patching Plaster - White - 6kg

Everbuild Jetcem Quick Set Patching Plaster typically dries in approximately 1 hour, but this can vary depending on environmental conditions.

While the product can be used on exterior surfaces, ensure it's protected from direct weather exposure, such as rain. For exterior use, consider a suitable sealant or paint system.

Store in a cool, dry place, and keep the container tightly sealed when not in use.

Yes, once the plaster is completely dry, you can paint over the patched area. Ensure the surface is sanded smooth beforehand.

You will need a mixing container, a filling knife or similar tool, and water. Sandpaper may be needed to smooth the surface after drying.

Check the packaging for the expiration date. Stored correctly, the product should be usable up to the date stated on the packaging.

Yes, Everbuild Jetcem Quick Set Patching Plaster is suitable for use on wood surfaces.

Ensure the mixture was not too thick. Ensure that the substrate was properly prepared and free of loose material. Consider applying in thinner layers if necessary, allowing each layer to dry before applying the next.

Check the expiration date of the product. The mix ratio may be incorrect, add less water. Ensure adequate ventilation in the area.

Use a clean filling knife and apply with consistent pressure. Allow for ample drying time before sanding.