Tableau High Shine Liquid Floor Polish 500Ml - Tableau

The frequency depends on foot traffic and how frequently you clean your floors. For high-traffic areas, you might need to reapply every few months. In lower-traffic areas, once or twice a year may be sufficient.

Tableau High Shine Liquid Floor Polish is designed for *sealed* hardwood floors. Ensure your hardwood floors have a sealant applied before using this product. If your floors are unsealed, this product is not suitable.

Wipe up spills immediately with a damp cloth. Avoid letting the polish sit on the floor for extended periods.

Drying time typically takes about 30 minutes, but it can vary. Ensure the area is well-ventilated and avoid walking on the floor until it's completely dry.

Yes, Tableau High Shine Liquid Floor Polish is suitable for use on sealed bathroom tiles.

Tableau Extra Strength Floor Cleaner is the recommended product for cleaning the floor before using the polish. It is usually available at the same retailers that sell Tableau High Shine Liquid Floor Polish.

Ensure you're applying a thin, even coat. Avoid applying too much polish. If streaking persists, you may need to re-clean the floor and reapply, using less polish.

Make sure the floor was thoroughly cleaned with Tableau Extra Strength Floor Cleaner before application. If the floor wasn't properly cleaned, the polish might not adhere correctly. Also, ensure the polish is completely dry before assessing the shine.

Ensure the floor is completely dry before application. Check the compatibility of the polish with your flooring type.