Elinchrom Skyport Plus HS Transmitter - Pentax

Hi-Sync (High-Sync) is an Elinchrom technology that allows flash synchronization at shutter speeds far beyond your camera's normal X-sync speed, up to 1/8000s with the Skyport HS Plus. This is particularly useful in bright daylight when you want to use a wide aperture for shallow depth of field or freeze motion.

TTL (Through-The-Lens) mode with the Skyport HS Plus Transmitter is primarily designed for flashes that support TTL, such as the Elinchrom ELB 500 TTL. Other flashes will typically function in manual mode.

The Skyport HS Plus Transmitter has a maximum transmission distance of up to 200 meters (656 feet) in open, unobstructed conditions.

Firmware updates are typically performed via the mini-USB port on the transmitter, using Elinchrom's software available on their website. Connect the transmitter to your computer and follow the on-screen instructions.

Yes, the Skyport HS Plus Transmitter allows for two-way control and visualization of power settings for up to 10 Elinchrom units within the same frequency channel and group.

The Elinchrom Skyport HS Plus Transmitter is powered by 2x AA batteries.

Manual Lock allows you to take an initial exposure reading and set your lights using TTL mode. Once you have achieved the desired exposure, you can lock these settings and switch to manual mode on the transmitter and flash, maintaining that exposure while allowing for further creative adjustments.

Ensure batteries are inserted correctly and have sufficient charge. Verify that the transmitter and flash units are on the same channel and frequency group. Check that the flash unit is powered on and has a clear line of sight to the transmitter (if obstructions are present). Ensure the flash unit has a functional Skyport receiver.

Confirm that your Elinchrom flash unit supports Hi-Sync or HSS (e.g., ELB 1200 with Hi-Sync head, or ELB 500 TTL in HSS mode). Ensure the transmitter and flash are in the correct Hi-Sync/HSS mode. For Hi-Sync, fine-tune ODS settings if necessary. Check that your camera's firmware is up-to-date and supports high-speed sync.

Check battery levels on both the transmitter and the flash unit. Ensure the flash unit's power cord is securely connected (if applicable). If using TTL, try locking the exposure in TTL and then switching to manual for more consistent results. Ensure no strong radio interference is present.

Replace the AA batteries with fresh ones. If the issue persists, contact Elinchrom support as the unit may require servicing.