Through Bolt - M8 x 130mm - Yellow
Best current price£3.42from Power Tools Direct
Best offers
Shopping.co.uk recommended and popular offers
Power Tools Direct£3.42Visit shop Fandf Yellow Through Bolts M8 X 130Mm 10Tb8130 (Bag 10)
Visit shopPower Tools Direct£3.42Visit shop One Offer
1 offer from £3.42
View price history by clicking the chart icon.
Power Tools DirectFandf Yellow Through Bolts M8 X 130Mm 10Tb8130 (Bag 10)
£7.95 delivery
£3.42
Visit shop
Product Information
Full details
This guide is for anyone using the Zoro Select Through Bolt (M8 x 130mm, Yellow). These bolts are designed for permanent installations, providing a quick and economical solution for securing various items. Note that the bolts are zinc yellow passivated, and the color may vary slightly.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | M8 x 130mm |
| Brand | ZORO SELECT |
Extended Product Information
FAQs
What is the correct drill bit size for installation?
Refer to the product specifications for the correct drill bit size. This is crucial for proper installation and holding strength.
Can these bolts be used outdoors?
Yes, the zinc yellow passivated finish offers some corrosion resistance. However, for prolonged outdoor use in harsh conditions, consider additional protective measures.
What is the maximum load capacity of the bolt?
Load capacity varies based on the material and installation. Refer to the product specifications or consult with a structural engineer for load capacity information.
What is the length of the bolt?
The bolt length is 130mm.
Are these bolts reusable?
These bolts are designed for permanent installations and may lose some holding strength if removed and reinstalled. They are generally not recommended for repeated use.
What is the finish of the bolt?
The finish is Zinc Yellow Passivated (ZYP).
What is the thread size of the bolt?
The thread size is M8.
Troubleshooting
Bolt spins in the hole and does not tighten.
The hole may be too large. Try using a slightly larger diameter bolt or filling the hole with an appropriate epoxy or filler material.
Bolt breaks during tightening.
The bolt may be over-torqued, or the material may be too weak. Reduce the torque or use a more suitable bolt for the material.
Bolt doesn't sit flush
Make sure the surface is flat and the hole is drilled straight. Clean any debris.
Pros and Cons
Pros
- Quick and easy to install, saving time and labor.
- Provides a strong and secure hold for permanent applications.
- Cost-effective solution for various fastening needs.
- Suitable for a wide range of materials and applications.
- Durable zinc yellow passivated finish for corrosion resistance.
Cons
- Requires drilling for installation.
- May not be suitable for all types of materials.
- The color may vary slightly due to the zinc yellow passivated finish.
- Not ideal for temporary installations that require frequent removal and reinstallation.
- Requires proper tools for installation.
Setup, Compatibility & Care
Setup
- Preparation: Ensure the work surface is clean and free of debris.
- Drilling: Drill a hole through the material that matches the bolt diameter (M8). Refer to the specific technical specifications for the correct hole size.
- Insertion: Insert the through bolt through the hole.
- Tightening: Tighten the bolt to the recommended torque specification. Over-tightening can damage the material.
Compatibility
The M8 x 130mm through bolts are generally compatible with various materials like concrete, brick, and some types of stone. Ensure the material can withstand the forces and loads applied. Always verify material compatibility before installation.
Care
- Inspect the bolts periodically for signs of wear or corrosion.
- In corrosive environments, consider using a protective coating or alternative materials for longer life.