Shopping.co.uk

Simplex Rope Clip Clamp - 6 x 8 mm - SolaDirect

Simplex Rope Clip Clamp - 6 x 8 mm - SolaDirect

These wire rope clamps are designed to securely fix the loose end of a loop back to the wire rope....

Best current price£9.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£9.99Visit shop

B&Q - 6 X 8 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes

Visit shop

One Offer

1 offer from £9.99

View price history by clicking the chart icon.

B&QB&Q - 6 X 8 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Free delivery in 1–3 days
£9.99
Visit shop

Product Information

Full details

The SolaDirect Simplex Rope Clip Clamp (6 x 8 mm) is designed for users needing a reliable method to secure the loose end of a wire rope loop. Its key benefit is providing a strong and stable connection point for attaching other cables or essential hardware like thimbles and turnbuckles. A potential caveat is ensuring the clamp size precisely matches the rope diameter for optimal safety and performance.

All features

BrandSolaDirect

Extended Product Information

FAQs

What is the correct way to install a Simplex rope clip clamp?

Form a loop, place the U-bolt over the dead end, position the saddle on the live loop, and tighten nuts evenly and firmly. Ensure correct sizing and periodic re-tightening.

How many clamps should I use for a secure loop?

For most wire rope applications, a minimum of three clamps is recommended for a secure termination. Always consult specific load charts or engineering guidelines for critical applications.

Can I use these clamps on non-wire ropes?

Yes, the SolaDirect Simplex Rope Clip Clamp is also versatile and can be applied to jute and polypropylene ropes of the specified diameter.

What does '6 x 8 mm' refer to?

This refers to the range of rope diameters the clamp is designed to accommodate, typically from 6 mm up to 8 mm.

How often should I check the tightness of the clamps?

It is recommended to check and re-tighten the clamps after initial loading, and then periodically thereafter, especially if the rope is subjected to regular stress or environmental changes.

What is the purpose of a thimble?

A thimble is inserted into the loop to protect the rope from abrasion and to maintain the shape of the loop, especially under load, preventing premature wear and kinking.

Troubleshooting

Rope slipping through the clamp

Ensure the clamp size is appropriate for the rope diameter. Re-tighten the nuts evenly to the correct torque specification. Check that the rope has not been significantly compressed.

Clamp appearing loose after initial use

This is normal as the rope may compress slightly. Re-tighten the nuts evenly after the initial loading and periodically thereafter.

Corrosion on the clamp surface

Light corrosion can often be removed with a wire brush. For significant corrosion, consider replacing the clamp to ensure safety and reliability.

Pros and Cons

Pros

  • Provides a secure and reliable termination for rope loops.
  • Enables easy integration with other rigging components.
  • Compatible with a range of rope types, including synthetic and natural fibers.
  • The specified size ensures a correct and safe fit when matched to the rope diameter.
  • Durable construction for extended use in demanding applications.

Cons

  • Requires precise matching of clamp size to rope diameter for effectiveness.
  • Not designed for applications involving extreme dynamic loads without proper engineering assessment.
  • Installation requires proper torque for optimal holding power.

Setup, Compatibility & Care

Setup:

  1. Form a loop in the wire rope at the desired length.
  2. Place the U-bolt section of the clamp over the 'dead' end (the loose end) of the rope, resting on top of the loop.
  3. Position the saddle section of the clamp on the other side of the loop, ensuring it sits flat against the main rope.
  4. Insert the nuts and washers and hand-tighten them.
  5. Using a wrench, tighten the nuts evenly, alternating between them to apply consistent pressure. A general guideline is to tighten to a specified torque (consult manufacturer specifications for precise values, typically around 70-80% of the torque required for permanent fixings) to prevent rope slippage.
  6. Re-tighten the clamps after initial loading and periodically thereafter, as rope can compress.

Compatibility:

  • Designed for wire rope diameters of 6 mm to 8 mm.
  • Also suitable for use with jute and polypropylene ropes of corresponding diameters.
  • Can be used in conjunction with thimbles and turnbuckles.

Care:

  • Inspect clamps regularly for signs of corrosion, wear, or damage.
  • Ensure nuts remain tight, especially after initial use and subsequent loading.
  • Clean clamps if necessary using a wire brush to remove debris or light rust. Avoid using harsh chemicals that could degrade the material.

Price History

DatePrice
Visit shop