Best current price£90,756.00from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£90,756.00Visit shop Molan White Exitex Rafter Bar End Bar Self Supported - 3Mtr
Visit shop6 offers from £90,756.00 - £181,524.00
View price history by clicking the chart icon.
The PolyX Rafter Bar (End Bar) is designed for contractors and DIY enthusiasts installing polycarbonate roofing systems who require a secure, weather-tight finish for roof edges. Its primary benefit is the built-in adjustable adaptor that eliminates the need for separate F-sections or edge closers, simplifying the installation process. A key caveat to note is that while it supports a wide range of thicknesses, users must ensure the snap-cap is fully engaged to achieve a proper seal.
| Colour | White |
|---|---|
| Model Part Number | ED60-W |
| Brand | Storm |
No, the PolyX Rafter Bar is specifically designed for sheet thicknesses between 16mm and 35mm.
No, the bar features an integrated adjustable adaptor that eliminates the need for an additional F-section or edge closer.
The bar is robust enough to support spans of up to 6 metres.
The snap-cap is designed for a secure fit, but frequent removal and re-installation may weaken the locking tabs over time.
This specific model (ED60-W) comes in a standard white finish.
Ensure the base profile is perfectly aligned and that no debris is trapped in the locking channels. Use a rubber mallet to gently tap the cap down if manual pressure is insufficient.
Check that the neoprene gasket is not pinched or folded and that the snap-cap is fully locked into the base along the entire length.
To install, ensure the rafter is level and properly supported. Place the base of the bar along the edge rafter and secure it using appropriate fixings. Position your polycarbonate sheet into the neoprene gasket bed, ensuring a small gap for expansion if necessary. Once the sheet is positioned, align the snap-cap over the base profile and apply even, downward pressure until it clicks into place along its entire length. For maintenance, keep the exterior clean by rinsing with water and a mild detergent; avoid abrasive cleaners or harsh solvents that could degrade the white finish. Inspect the snap-cap annually to ensure it remains fully seated in the base profile.
