Cuprinol Wood Preserver Clear is an oil-based wood preservative treatment for interior and exterio...Cuprinol Wood Preserver Clear is an oil-based wood preservative treatment for interior and exterior timber that prevents insect attack, rot and decay. Applying Cuprinol Wood Preserver Clear We recommend applying two coats along the wood grain using a brush to clean, dry surfaces before painting or varnishing. Before application remove excessive dirt and soiling, large areas of algae, lichen or fungi using an appropriate fungicidal wash or cleaner designed for the job. Wood that has been wood-stained, painted or vanished should be stripped back to bare wood and treated as bare wood. Leave the first coat to soak in before applying the second but reapply before the first is fully dry (typically 2-6 hours). Leave 16 hours for the second coat to dry before painting, staining or vanishing. Do not spray. A colourless general-purpose preserver for interior or exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi. Actively prevents rot and decay Colourless preserver for both interior and exterior use For use as a basecoat before painting, staining or varnishing Protect and preserve your wooden surfaces before painting, staining or varnishing with this Cuprinol product. It's a colourless preserver that...
This guide provides essential information for using Cuprinol Wood Preserver Clear, designed for both interior and exterior wood surfaces. It's ideal for protecting your wood from insect attack, rot, and decay, offering deep-penetrating protection. However, ensure the wood is properly prepared before application for optimal results.
All features
Model Part Number
5330417
Brand
Cuprinol
Extended Product Information
FAQs
How many coats of Cuprinol Wood Preserver Clear should I apply?
We recommend applying two coats for optimal protection.
Can I apply Cuprinol Wood Preserver Clear over existing paint or varnish?
No, you must remove any existing paint, stain, or varnish to expose the bare wood before applying the preserver.
How long should I wait before painting or staining after applying the preserver?
Allow 16 hours of drying time after the second coat before applying paint, stain, or varnish.
Can Cuprinol Wood Preserver Clear be used on all types of wood?
Yes, it is suitable for use on most types of wood.
Can this product be used outdoors?
Yes, Cuprinol Wood Preserver Clear is suitable for both interior and exterior use.
How should I clean my tools after use?
Clean brushes with a suitable brush cleaner or white spirit immediately after use.
Troubleshooting
Preserver is not penetrating the wood.
Ensure the wood surface is clean and dry. Lightly sand the surface to open the wood grain. Check that the product is within its expiry date.
Uneven finish after application.
Apply the product evenly, following the wood grain. Avoid excessive product build-up. Ensure a consistent application rate across the surface.
Pros and Cons
Pros
Prevents insect attack, rot, and decay.
Suitable for both interior and exterior use.
Acts as a base coat for painting, staining, or varnishing.
Colourless, preserving the natural wood appearance.
Cons
Requires proper surface preparation for best results.
Application involves multiple coats, which can be time-consuming.
Must be applied before painting, staining or varnishing
Setup, Compatibility & Care
Setup:
Surface Preparation: Clean the wood surface thoroughly to remove dirt, algae, or fungi. Use a fungicidal wash if necessary.
Bare Wood: If the wood has been previously painted, stained, or varnished, strip it back to bare wood.
Application: Apply the first coat along the wood grain using a brush.
Reapplication: Apply a second coat before the first coat is fully dry (typically 2-6 hours).
Compatibility:
Compatible with most types of wood.
Suitable as a base coat under paint, stain, or varnish.
Care:
Allow 16 hours of drying time after the second coat before painting, staining, or varnishing.