Clarke ETC8 Electric Tile Cutter - PTDCLA3400515

The Clarke ETC8 is designed for cutting ceramic tiles. It may not be suitable for all other tile types.

Unplug the tile cutter. Consult the user manual for detailed instructions on safely removing and replacing the blade. Always wear gloves when handling the blade.

The maximum cut depth is 35mm at 90 degrees and 22mm at 45 degrees.

The water reservoir should be refilled regularly to maintain a consistent water flow to the blade. Check the water level frequently during operation.

The tile cutter is designed for indoor use. If you must use it outdoors, ensure it is protected from rain and direct sunlight.

Always wear safety glasses or goggles. Use appropriate gloves. Ensure the work area is well-lit and stable. Do not force the cut.

Replacement parts can be found through the manufacturer's website or authorized dealers.

Check if the blade is worn and needs replacing. Ensure the blade is properly installed and the water reservoir is adequately filled. Apply gentle, even pressure while cutting.

Check the power connection and outlet. Inspect the power cord for damage. If the motor still doesn't run, consult a qualified technician.

Make sure the parallel fence is securely fastened and correctly aligned. Check the blade for any wobble or damage. Ensure the tile is firmly placed during cutting.

Ensure the water reservoir is full and the water is reaching the blade. Reduce the cutting speed and apply even pressure. Clean the water reservoir regularly to avoid blockages.