Individual, split die nut for repairing damaged or crossed threads and cleaning existing threads.
Best current price£7.93from eBay
Shopping.co.uk recommended and popular offers
eBay£7.93Visit shop Connect Die Nut M12 x 1.25 - 37049
Visit shop
Amazon£9.43Visit shop Connect Silver 37049 Die Nut M12 X 1.25 From 4554,
Visit shop7 offers from £7.93 - £11.53
View price history by clicking the chart icon.
This Connect Die Nut (M12 x 1.25, MPN 37049) is designed for mechanics and DIY enthusiasts who need to repair damaged or crossed threads, or clean existing ones on bolts and studs. Its key benefit is restoring thread integrity, saving the cost of replacement parts. A potential caveat is that it requires precise alignment to avoid further thread damage. This versatile tool addresses common threading issues with its durable construction and specific M12 x 1.25 sizing.
| Model Part Number | 37049 |
|---|---|
| Brand | Connect |
'M12' refers to the nominal diameter of the thread in millimeters (12mm). '1.25' refers to the pitch, which is the distance between the thread crests in millimeters (1.25mm). This indicates a fine thread metric size.
This die nut is primarily for repairing damaged or crossed threads, and for cleaning existing threads. It may not be effective on completely stripped threads where the original thread form is entirely gone.
Yes, a die handle or a suitable wrench is required to hold and turn the die nut. These are typically sold separately.
Start threading the die nut onto the bolt or stud by hand if possible. Ensure it engages squarely and is perpendicular to the bolt's axis before applying rotational force with the handle.
After use, remove any metal filings with a brush or compressed air. For stubborn debris, a penetrating oil can help loosen it. Ensure it is dry before storing.
No, this die nut is made of hardened steel and is intended for use on metal threads only. It will likely damage plastic threads.
The split design allows the user to slightly adjust the opening of the die. This enables finer control over the cutting depth and pressure, which is crucial for repairing damaged threads without removing too much material.
Ensure you are using the correct M12 x 1.25 thread size. Apply cutting fluid or oil. If threads are severely damaged, start with a lighter pass or use a die handle that offers better leverage. Check for debris obstructing the threads.
Verify the die nut is correctly aligned with the bolt/stud axis. Ensure you are turning the die nut in the correct direction (typically clockwise to cut/clean). The damage may be too severe for this type of repair; consider professional machining if applicable.
This die nut is designed to cut new material or clean existing material. A slight looseness is expected as it begins to engage. If it remains excessively loose, the underlying thread may be too far gone for repair with this tool.
Setup: To use the Connect Die Nut, first ensure the bolt or stud you intend to work on is securely held or accessible. Identify the damaged or dirty thread section. The die nut typically requires a compatible handle or wrench (sold separately) to provide the necessary torque for cutting or cleaning.
Compatibility: This die nut is specifically designed for M12 x 1.25 threads. It is compatible with bolts, studs, and threaded rods of this precise specification. It is not suitable for metric coarse threads or imperial thread sizes.
Care: After each use, clean the die nut to remove any metal shavings or debris. A wire brush can be effective for this. Apply a light coat of oil or a rust inhibitor to prevent corrosion during storage. Store the die nut in a dry environment, preferably in a protective case or container to avoid damage.
