Copper Grease - K2 - W122

The K2 Copper Grease W122 operates effectively in a temperature range of -400°C to 1100°C.

This copper grease is primarily designed for metal-to-metal contact. It is not recommended for use on plastic or rubber components unless compatibility has been confirmed.

Store the can in a cool, dry place, away from direct sunlight and heat sources to maintain its effectiveness.

Yes, the product is resistant to water and weather conditions, providing protection even in wet environments.

Wipe away any excess grease immediately after application with a clean cloth. For dried residue, a suitable degreaser may be required.

The main benefits are reducing friction, preventing metal parts from seizing and squeaking, and protecting against corrosion, especially under high temperatures.

Yes, it helps prevent bolts from seizing by lubricating threads and protecting against corrosion. It can also help loosen slightly seized bolts by penetrating the threads.

Ensure the can is thoroughly shaken before use. If the nozzle is clogged, turn the can upside down and spray until clear propellant emerges.

Re-apply a thin, even layer of grease, ensuring the component surfaces are clean and dry before application. Ensure adequate coverage on all contact points.

Clean the affected area and re-apply the copper grease. Ensure the initial application was sufficient and the environment is not excessively harsh without periodic re-application.

This is unlikely if applied correctly. Ensure a thin layer was applied; too much grease can sometimes attract dirt. If a part is seized, heat might be required in addition to lubricant.