Best current price£192.00from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£192.00Visit shop AIM MXG/MXP/MXS (MX Strada Series) 23 Pin AMP Connector With Harness - Versions 1.2 And 1.3 (White Plug)
Visit shop3 offers from £192.00
View price history by clicking the chart icon.
This AIM Motorsport Connector With Harness is designed for users of AIM MXG/MXP/MXS Strada Series dash displays who need a streamlined and easier installation process. Its key benefit is providing pre-wired connections for essential data channels, simplifying setup. A potential caveat is that later dash display versions (1.2/1.3) use a different harness part number, identified by a white connector, distinguishing them from earlier 1.1 models with black connectors.
| Colour | White |
|---|---|
| Model Part Number | V02573330 |
| Brand | AIM |
This harness is compatible with AIM Motorsport MXG, MXP, and MXS Strada Series dash displays. It is important to note that this specific harness features a white connector and is intended for dash display versions 1.2 and 1.3, distinguishing it from earlier versions that use a black connector.
The harness includes pre-wired connections for 4 analogue channels, speed, and lap channels. It also provides access to RS232tx/rx, Digital output, and CAN2+/-.
Yes, all necessary connections are pre-wired and terminated with 719 binder plugs.
The harness provides access to Analogue channels 1-8. While 4 are pre-wired, you may be able to utilize the remaining analogue channels if you have the appropriate connectors and wiring expertise.
Later versions of the AIM dash displays (1.2/1.3) use a harness with a white connector plug. This distinguishes them from earlier 1.1 models which have a black connector plug.
The RS232tx/rx connections are for serial communication with other devices, while CAN2+/- allows for expansion and connection to other CAN bus devices, enabling more complex data integration.
Verify that the 23-pin AMP connector is fully seated in the dash display. Check that the sensors or devices are correctly connected to the harness's binder plugs and powered if necessary.
Confirm that the sensor for that specific channel is functioning correctly and wired to the correct pin on the harness. Consult the AIM dash display manual for channel mapping and sensor requirements.
Inspect the wiring and connections for any loose or damaged pins or wires. Ensure the harness is routed away from potential sources of electrical interference.
Double-check that your AIM dash display is a compatible model (MXG, MXP, MXS Strada Series) and confirm if you have an earlier version (black plug) or a later version (white plug) for this specific harness.
Setup: Connect the 23-pin AMP connector directly to the corresponding port on your AIM Motorsport MXG, MXP, or MXS dash display. Ensure the connection is secure. The harness is pre-wired for common channels (4 analogue, speed, lap) terminated with 719 binder plugs, ready to be connected to your sensors or other devices.
Compatibility: This harness is specifically designed for AIM Motorsport MXG, MXP, and MXS Strada Series dash displays. Crucially, verify the version of your dash display. Later versions (1.2/1.3) use a white connector plug, while earlier 1.1 models use a black connector plug. This white connector harness is for the later models.
Care: Keep the connector and harness clean and dry. Avoid exposing it to excessive moisture or contaminants. Inspect the cable and connectors periodically for any signs of damage. Store the harness properly when not in use to prevent kinks or abrasions.
