Best current price£133.85from B&Q
Shopping.co.uk recommended and popular offers
B&Q£133.85Visit shop B&Q - White Multi-Surface Construction Sealant & Adhesive 290Ml (12 Pack)WaterproofWeatherproof Silicone
Visit shop2 offers from £133.85
View price history by clicking the chart icon.
This OB1 White Multi-Surface Construction Sealant & Adhesive is designed for professionals and DIY enthusiasts undertaking construction, maintenance, and repair tasks. Its key benefit is providing a strong, waterproof, and weatherproof bond across numerous building materials for both interior and exterior applications. A potential consideration is the white colour, which, while good for matching, may not suit all aesthetic requirements.
| Colour | White |
|---|---|
| Brand | OB1 |
Once cured, the OB1 White Multi-Surface Construction Sealant & Adhesive can typically be painted over with most standard paint systems. Ensure the sealant is fully dry before painting.
Yes, the waterproof and weatherproof formula makes it highly suitable for sealing joints and gaps in bathrooms, kitchens, and other high-moisture environments.
Typically, an unopened tube stored correctly in cool, dry conditions can last for up to 12 months. Refer to the packaging for specific expiry dates.
Full curing time can vary depending on bead size, temperature, and humidity, but typically ranges from 24 to 48 hours for a complete cure.
Yes, its multi-surface capability allows it to bond a wide range of common building materials effectively.
Absolutely. The waterproof and weatherproof formula ensures durability and resistance to environmental conditions for exterior applications.
Ensure the nozzle is properly cut and the tube is securely loaded into the sealant gun. Check for any obstructions in the nozzle.
Verify that the surfaces were properly prepared (clean, dry, and free from dust or grease). Ensure adequate pressure was applied during application and the sealant was tooled off correctly.
Practice applying a consistent bead by maintaining steady pressure on the sealant gun and moving at a uniform speed. Experiment with nozzle angle and cut.
This may be due to excessive humidity, low temperatures, or applying the bead too thickly. Ensure application is within recommended temperature ranges and allow sufficient curing time.
Setup: Ensure surfaces are clean, dry, and free from dust, grease, and loose material. Apply using a standard sealant gun. Cut the nozzle to the desired bead size. Apply an even bead and tool off with a wet finger or spatula for a smooth finish.
Compatibility: This sealant offers strong adhesion to a wide range of common building materials including wood, metal, brick, concrete, plaster, and some plastics. Always test on a small, inconspicuous area first if unsure about compatibility with specific materials.
Care: Keep the tube tightly capped when not in use to prevent the sealant from drying out. Store in a cool, dry place away from direct sunlight and extreme temperatures. Clean up uncured excess with a damp cloth. Cured sealant can be removed mechanically or with a suitable solvent.
