Maypole Power Inverter - 150W

Best current price£29.69from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£29.69Visit shop Maypole 56015 150W 12V/230V Power Inverter with USB
Visit shop
Best current price£29.69from eBay
Shopping.co.uk recommended and popular offers
eBay£29.69Visit shop Maypole 56015 150W 12V/230V Power Inverter with USB
Visit shop5 offers from £29.69 - £34.07
View price history by clicking the chart icon.
2 offers from £26.98
View price history by clicking the chart icon.
The Maypole 150W Power Inverter is designed for individuals needing to power small electronic devices from a 12V DC source, such as in cars, vans, or recreational vehicles. Its key benefit is providing AC power on the go, ideal for charging laptops, phones, or running small entertainment devices. A primary caveat is its modified sine wave output, which is not suitable for all sensitive electronics.
| Model Part Number | MP56015 |
|---|---|
| Brand | Maypole |
A modified sine wave inverter produces an AC power output that approximates a sine wave. It's suitable for many common electronics but may cause issues or reduce the lifespan of highly sensitive devices that require a pure sine wave.
No, this 150W inverter is not powerful enough for most refrigerators, which have high start-up wattage requirements. It is designed for much smaller electronic devices.
The run time depends on the device's power consumption and the capacity of your 12V battery. For example, a 150W device would drain a typical car battery much faster than a 15W phone charger.
While the inverter has low standby power consumption, it's recommended to disconnect it when not in use for extended periods to prevent any potential battery drain.
Information regarding the specific warranty period is not provided in the product details. Please refer to your purchase documentation or the manufacturer's official website for warranty details.
This inverter requires direct connection to the vehicle's battery terminals using the provided cables. Cigarette lighter sockets typically have a lower amperage limit and are not suitable for this inverter's power draw.
Check that the battery connections are secure and correct (red to positive, black to negative). Ensure the 12V battery has sufficient charge. Verify the inverter's power switch is in the 'on' position.
Confirm the device's power requirement (in watts) does not exceed the inverter's 150W rating. Check if the device is compatible with modified sine wave output. Ensure the connection to the inverter is stable.
This could be due to overload, over-temperature, or low battery voltage. Disconnect the device, allow the inverter to cool if hot, and ensure the battery is adequately charged. Restart the inverter after checking the connected device's wattage.
Ensure the USB port is functioning by testing with a different device. Confirm the device's charging requirements are within the 1A output of the USB port. Check the inverter is powered on.
Setup:
Compatibility:
Care: