Metsä Wood - Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 44mm - 27mm

PSE stands for 'Planed Square Edge'. It means the timber has been machined and planed on all four sides to give it a smooth finish and consistent, square dimensions.

This timber is not treated for outdoor use. For exterior applications, it must be thoroughly treated with an appropriate wood preservative, paint, or outdoor-rated sealer to protect it from moisture, fungi, and insect attack.

Store the timber flat on a level surface in a dry, well-ventilated area, away from direct sunlight and extreme temperature fluctuations. This helps prevent warping and bowing.

Yes, Whitewood Spruce takes paints and stains very well due to its smooth planed surface and consistent grain. For best results, ensure the timber is clean and dry, and consider a light sanding and appropriate primer before finishing.

This timber stick measures 2.4 meters in length, 44mm in width, and 27mm in thickness.

Standard woodworking tools such as hand saws, circular saws, miter saws for cutting, drills for pilot holes, and sanders for finishing are all suitable for working with this softwood.

Ensure timber is stored flat and allowed to acclimatize to the project environment before use. Rapid changes in humidity or improper storage can cause movement. Stack flat with spacers if storing for extended periods.

Use a sharp saw blade appropriate for wood. Dull blades or incorrect blade types can cause rough cuts and splintering. For cross-cuts, consider scoring the cut line first.

Ensure the timber surface is clean, dry, and free of dust, grease, or previous finishes. A light sanding (e.g., 220-grit) before priming or applying finish can improve adhesion. Always use an appropriate primer if painting.

Pre-drill pilot holes for screws, especially when working close to the edges or ends of the timber. The pilot hole should be slightly smaller than the screw's core diameter.