Connekt Gear USB 3 to HDMI Adapter - Black

No, this Connekt Gear USB 3 to HDMI adapter is designed for video transmission only and does not support audio.

The adapter supports a maximum resolution of 1920x1080 pixels (Full HD) at a refresh rate of 60Hz.

No, this adapter features Plug and Play functionality, meaning it should work automatically on most compatible systems without requiring driver installation.

While it may connect to a USB 2.0 port, it is not recommended. USB 2.0 ports lack the necessary bandwidth to reliably support the 1920x1080 resolution at 60Hz. For optimal performance, use a USB 3.0 port.

No, this adapter is designed exclusively for connecting a USB source device to an HDMI display. It does not function in reverse.

The cable length is 240mm, which is approximately 0.24 meters.

The connector contacts are plated with gold for enhanced conductivity and durability.

Ensure the adapter is securely plugged into both the USB 3.0 port on your source device and the HDMI cable connected to your display. Verify that your display is set to the correct HDMI input. Check your operating system's display settings to ensure the external display is enabled and configured. For optimal results, use a USB 3.0 port.

Confirm that the USB port on your source device is USB 3.0. USB 2.0 ports may not support the required bandwidth for higher resolutions and refresh rates. Also, check the display settings in your operating system to manually set the resolution and refresh rate to 1920x1080 at 60Hz.

This adapter is designed for video only and does not transmit audio. You will need to use a separate audio connection (e.g., from your device's headphone jack or built-in speakers) for sound.

Try connecting the adapter to a different USB 3.0 port on your computer. If using a USB hub, connect it directly to the computer's USB port. Ensure your operating system is up to date, as older versions might have limited support for USB display adapters.