Galvanised Reinforcement Coil - BPC Fixings

Galvanised expanded metal brickwork reinforcement is embedded in mortar joints (approx. every thir...

Best current price£18.65from eBay

All Offers

2 offers from £18.65 - £22.80

View price history by clicking the chart icon.

eBayGalvanised Brick Reinforcement Coil Mesh 100mm Wide x 20 metres
£5.99 delivery
£18.65
Visit shop
HSS HireBpc Green Expanded Metal Brickwork Reinforcement 100Mm
Free delivery in 1–3 days
£22.80
Visit shop

Product Information

Full details

This guide provides essential information for using BPC Fixings Galvanised Reinforcement Coil. It's designed for builders and DIY enthusiasts seeking to reinforce brickwork, offering increased wall strength and crack prevention. A key benefit is the added tensile strength, however, proper installation in mortar joints is crucial for optimal performance. This product is typically embedded in mortar joints to fortify walls against vibrations and settlement-related cracking.

All features

BrandBPC Fixings

Extended Product Information

FAQs

How often should I install the reinforcement coil?

Typically, install the coil every third course of bricks.

What type of mortar should I use?

Standard mortar mixes are suitable for use with the reinforcement coil.

Is the galvanised coating effective?

Yes, the galvanised coating provides corrosion resistance, extending the life of the reinforcement.

Can I use this for non-load-bearing walls?

Yes, it can be used for both load-bearing and non-load-bearing walls to add strength and prevent cracking.

How do I cut the coil to the right length?

Use metal snips or a similar tool to cut the coil to the required length for each section of the wall.

What are the key benefits?

Increased tensile strength, reduced cracking, and enhanced wall durability.

Is any special equipment needed?

You'll need tools for bricklaying (trowel, level) and a tool for cutting the coil (snips).

Troubleshooting

Coil not lying flat in the mortar.

Ensure the mortar bed is even before placing the coil. Use a trowel to adjust the mortar as needed.

Cracks appearing in the wall despite using the coil.

Check if the coil was installed every third course and fully embedded in mortar. Ensure the mortar mix is correct and that the building is not subject to extreme movement.

Pros and Cons

Pros

  • Increases the structural integrity of brick walls.
  • Helps prevent cracks and improves the lifespan of the structure.
  • Easy to install during bricklaying.
  • Made from durable, galvanised metal.
  • Cost-effective solution for reinforcing walls.

Cons

  • Requires careful installation to ensure effectiveness.
  • May require additional labor during bricklaying.
  • The reinforcement coil is only effective when properly embedded in mortar.
  • The appearance is not aesthetically pleasing, as it is hidden within the wall.
  • Specific measurements are required for effective use

Setup, Compatibility & Care

Setup

  1. During bricklaying, apply a layer of mortar.
  2. Place the Galvanised Reinforcement Coil on the mortar bed, typically every third course.
  3. Ensure the coil is fully embedded within the mortar.
  4. Continue laying bricks, ensuring the coil is covered by mortar.

Compatibility

  • Mortar: Compatible with standard mortar mixes.
  • Bricks: Works with all common brick types.

Care

  • No specific care is required, as the coil is embedded within the wall.
  • Ensure proper mortar coverage to prevent corrosion.

Similar items

Price History

DatePrice
Visit shop