Laguna Pressure-Flo 8000 Quartz Sleeve - PT1525
Best current price£29.99from Pondkeeper
Best offers
Shopping.co.uk recommended and popular offers
Pondkeeper£29.99Visit shop Laguna Pressure-Flo 8000 Quartz Sleeve Sp-Lag8000quart
Visit shopPondkeeper£29.99Visit shop One Offer
1 offer from £29.99
View price history by clicking the chart icon.
Product Information
Full details
The Laguna Pressure-Flo 8000 Quartz Sleeve is an essential replacement component designed for pond owners utilizing the Laguna Pressure-Flo 8000 filtration system. It acts as a protective housing for the UV bulb, allowing ultraviolet light to pass through while keeping the electrical components shielded from water, though it requires careful handling during installation due to its fragile glass construction.
All features
| Model Part Number | PT1525 |
|---|---|
| Brand | Laguna |
Extended Product Information
FAQs
Is this quartz sleeve compatible with other Pressure-Flo models?
No, this part is specifically designed for the Pressure-Flo 8000 (Model PT1525) and may not fit or seal correctly in other models.
How often should I clean the quartz sleeve?
It is recommended to clean the sleeve during every routine UV lamp inspection or whenever you notice a drop in pond water clarity.
Can I touch the glass with my fingers?
It is best to avoid touching the glass directly. Use a clean cloth to prevent skin oils from leaving residue that can bake onto the sleeve.
Do I need to replace the O-ring when I replace the sleeve?
While the O-ring may be reused if it is in perfect condition, it is often recommended to replace it to ensure a watertight seal.
What is the best way to remove mineral deposits from the glass?
A mild vinegar solution or a specialized pond-safe cleaner can be used to gently wipe away mineral buildup.
Troubleshooting
Water leaking into the UV housing
Check that the O-ring is seated correctly and is not pinched or damaged during the sleeve installation.
Reduced water clarity
Inspect the quartz sleeve for mineral build-up or calcification; clean gently with a vinegar solution if dirty.
UV light appears dim
Verify that the sleeve is clean and that there is no internal condensation caused by a poor seal.
Pros and Cons
Pros
- Genuine manufacturer part guarantees compatibility
- High-clarity glass maintains optimal UV sterilization efficiency
- Essential for protecting the UV lamp and electrical housing
- Easy to install during routine filter maintenance
Cons
- Fragile glass material can crack if handled improperly
- Requires careful alignment with existing seals to prevent leaks
- Limited to specific Laguna Pressure-Flo 8000 model
Setup, Compatibility & Care
To install, ensure the filter unit is powered off and disconnected. Carefully remove the old sleeve by gently pulling it from the housing, taking care not to shatter the glass. When inserting the new PT1525 sleeve, ensure the O-ring is properly seated and lubricated with silicone grease if recommended by the manual to prevent leaks. Avoid touching the glass surface with bare hands, as natural oils can bake onto the glass when the lamp gets hot; use a clean, dry cloth for handling. The sleeve is compatible only with the Laguna Pressure-Flo 8000; do not attempt to use it in other models.
Similar items
Ferrari Montblanc Great Characters Enzo Ferrari Special Edition Rollerball Pen - Giallo ModenaFrom £1010
Montblanc - Great Characters Enzo Ferrari Special Edition Fountain Pen - 132144From £1265
Marshalltown EzyScreed Level - 1.8MFrom £155
Ferrari Montblanc Great Characters Enzo Ferrari Special Edition Giallo Modena Fountain Pen - MB130661From £1080
Colossus Roller System Kit - Draper - ADJPKCOL12From £59
Laguna Pressure-Flo Quartz Sleeve - 4000/7500From £30
WAGO Test Probes - 206-912From £28
Montblanc Great Characters Enzo Ferrari Special Edition Ballpoint Pen - FerrariFrom £920
NGK Glow Plug - CZ552 - 92738From £24
Fluke Voltage Detector Pen - 1AC-II/SFrom £32
NGK Glow Plug - Y1021J - 97627From £8
Korda Boom Tubes - 6in & 9in - KBOX20From £5