Dryrods deliver the correct dose every time. Traditional rising damp treatment methods utilize cre...Dryrods deliver the correct dose every time. Traditional rising damp treatment methods utilize cream or liquid injection, which can be prone to operator error leading to under-treatment and DPC failure. Due to their unique patented design, Dryrod Damp-Proofing Rods deliver the correct dose of active ingredient every time. Extensively Tested and Internationally Approved: Laboratory testing has proven that Dryrod Damp-Proofing Rods out-perform competing treatment methods, even in highly-saturated walls and freezing temperatures. They have also been approved by the British Board of Agrement and the German WTA organization. 100% Active Ingredient for Maximum Water Repellency: It is not possible to infuse 100% pure active ingredient into a traditional Damp-Proofing Cream. Thanks to their unique fibre rods, Dryrod Damp-Proofing Rods are saturated with 100% silane/siloxane. Only the pure active ingredient diffuses into the wall, in a controlled dose that ensures consistent application. Cheaper creams may seem more attractive, but they often only contain around 25%-50% active ingredient and cannot outperform Dryrod. Features include: Fast and simple to install, no specialist equipment required, exact dosage, BBA approved. Dryrod Damp-Proofing Rods are patented, 12 mm diameter grooved rods that carry a powerful water-repellent material. The rods are inserted into pre-drilled 12 mm holes along the mortar lines of a building. The water-repellent material diffuses deeply into the damp masonry, curing to form a highly effective barrier to damp, stopping further rising damp.
This guide is for homeowners and contractors seeking an effective solution for rising damp. Dryrod Damp Proofing Rods offer a reliable, easy-to-install method for creating a waterproof barrier, preventing further damage to your property. A key benefit is the precise dosage of active ingredient delivered with each rod. However, it's important to note that the effectiveness depends on proper installation and assessing the source of the damp.
All features
Brand
Dryrod
Extended Product Information
FAQs
How long does it take for Dryrod to work?
The active ingredient diffuses over time. You should see improvements within a few weeks, with full effectiveness in a few months.
Can I use Dryrod on all types of walls?
Dryrod is suitable for most brick and stone walls. Check the product specifications for compatibility.
Do I need special tools for installation?
No, you only need a 12mm drill bit and a drill.
How many rods do I need?
The number of rods needed depends on the wall length. Refer to the product instructions for guidance.
Can I paint over the treated walls?
Yes, once the walls are dry and the treatment has taken effect, you can paint over them.
Is Dryrod environmentally friendly?
The product uses a water-repellent material that diffuses into the masonry. Check the product information for details on environmental considerations.
What if I miss a hole when inserting the rods?
Ensure all holes are filled according to instructions. If a hole is missed, redrill the hole and insert a rod.
What is the shelf life of Dryrod rods?
Check the product packaging for the expiration date.
Troubleshooting
Dampness persists after installation.
Ensure rods were installed correctly, check for other sources of damp, and allow sufficient time for diffusion. Consider further evaluation of the source of damp.
Rods are difficult to insert.
Ensure drill holes are the correct size (12 mm). Clear any debris from the holes before insertion.
Visible residue after installation.
Wipe away any excess material with a damp cloth, following the product guidelines. Ensure the rods are inserted completely.
Pros and Cons
Pros
Delivers the correct dose of active ingredient.
Easy to install without specialist equipment.
BBA approved for reliability and quality.
Provides a long-lasting barrier against rising damp.
Suitable for various wall conditions and temperatures.
Uses 100% active ingredient for maximum effectiveness.
Cons
Requires drilling holes in the mortar lines.
May not be suitable for all types of damp problems (e.g., penetrating damp).
Effectiveness depends on proper installation.
Requires accurate assessment of the source of damp.
Not a quick fix; requires time for the active ingredient to diffuse.
Cost may be higher compared to some alternative methods.
Setup, Compatibility & Care
Preparation: Identify the mortar lines and remove any damaged plaster.
Drilling: Drill 12 mm holes along the mortar course.
Insertion: Insert the Dryrod rods into the holes.
Sealing (Optional): Seal the holes if desired, following the product guidelines.
Compatibility:
Suitable for most types of brick and stone walls.
Ensure compatibility with any existing damp-proofing systems.
Care:
Handle the rods with care to avoid damage.
Follow the manufacturer's guidelines for proper insertion depth and spacing.