Best current price£320.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£320.00Visit shop Uklintels 200Mm Galvanised Steel Standard External Solid Wall Box Lintel With Toe 2550Mm
Visit shop
B&Q£324.11Visit shop - Uklintels External 200mm Solid Wall Box With Toe (Standard)2550mm Length
Visit shop2 offers from £320.00 - £324.11
View price history by clicking the chart icon.
The UKLintels 2550mm External Solid Wall Box Lintel with Toe is designed for professional builders and contractors tasked with structural masonry support in 200-215mm solid walls. Its primary benefit is providing robust, high-performance load-bearing capacity for floor loads and roof trusses while offering a built-in plaster key for seamless finishing. A notable caveat is that its 2550mm length requires careful planning for transport and safe manual handling on-site to prevent bending or injury.
| Model Part Number | 2550mm |
|---|---|
| Brand | B&Q |
No, this specific model is engineered for solid wall construction (200-215mm).
Cutting structural steel lintels is generally discouraged as it can compromise the load-bearing rating and protective galvanised coating.
It refers to the ratio of the span to the load-bearing capacity, indicating how the lintel performs under specific structural loads.
The galvanised finish provides excellent protection on its own, but you can paint it using a suitable metal primer if aesthetics require it.
A minimum of 150mm of masonry support on each end is standard for this type of lintel.
Check if the lintel was stored flat on level ground. If significantly deformed, it must be replaced as it will not meet load-bearing requirements.
Ensure the plaster key is free from heavy debris or thick grease. Apply a suitable bonding agent or metal primer if the surface has become excessively smooth.
Installation should always follow structural engineer specifications. Ensure the lintel is supported by at least 150mm of solid masonry on each end. Always use a damp-proof course (DPC) as required by local building regulations to prevent moisture bridging. To maintain the product, avoid using abrasive cleaners or corrosive substances near the steel. If the galvanised coating is accidentally scratched during installation, apply a cold-galvanising spray to the affected area to prevent localized oxidation. Store the lintels flat and off the ground to prevent warping before use.
