Blooma Heavy Duty Galvanised Steel Tee Hinge - (L)600mm

No, fixings (screws) are not included with this Blooma Heavy Duty Galvanised Steel Tee Hinge and must be purchased separately.

Yes, the hinge is made of galvanized steel, making it suitable for both internal and external use due to its corrosion resistance.

Clean the hinge regularly with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the galvanized coating.

For standard gates, two hinges are typically sufficient. For heavier or larger gates, consider using three hinges or consulting the gate manufacturer's recommendations.

This particular Blooma Heavy Duty Galvanised Steel Tee Hinge is 600mm in length.

Use screws appropriate for the material of your shed or gate (e.g., wood screws for timber). Ensure they are long enough to provide a secure hold but not so long that they pass through the material entirely.

Apply a small amount of lubricating oil or grease specifically designed for metal hardware to the hinge pin and pivot points.

Ensure the hinge is securely fastened with adequate screws. Check if additional hinges or reinforcement are needed for the weight of the door.

Light rust can often be removed with a soft cloth and a mild rust remover. For significant rust, the galvanized coating may be compromised, and replacement might be considered.

Ensure you are using the correct size screws for the pre-drilled holes or material. If the hole is stripped, consider using a larger screw or a wood filler/dowel repair.