Best current price£34.54from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£34.54Visit shop Pinless Damp Moisture Meter Mt28 Digital Moisture Detector Paper Humidity Tester For Wood Building Material Firewood Walls Paper Floor (Green) 730229248906
Visit shop1 offer from £34.54
View price history by clicking the chart icon.
The RDINSCOS MT28 Moisture Meter is designed for homeowners, contractors, and inspectors to quickly detect relative moisture levels caused by leaks and flooding, and measure the moisture content in building materials. Its key benefit is providing non-invasive readings up to 20mm deep using an electromagnetic field. A caveat to keep in mind is that accurate readings require maintaining a safe distance from metal objects during measurement.
| Model Part Number | MT28 |
|---|---|
| Brand | RDINSCOS |
The MT28 uses an electromagnetic field that penetrates the surface up to 20mm to detect the presence of moisture. It measures relative moisture levels based on how this field is affected by water content in the material.
The 'Hold' function allows you to freeze the current measurement displayed on the screen. This is useful for recording readings accurately without the display changing as you move the device.
The MT28 features a three-color display (green for dry, yellow for moderate, red for wet) and an audible alarm that sounds when high moisture levels are detected.
The meter can detect moisture up to a depth of 20mm (approximately 0.78 inches) below the surface.
Yes, the RDINSCOS MT28 Moisture Meter includes a 9V battery.
Relative moisture level indicates how moist a material is compared to a dry state, rather than an absolute percentage of water content. The three-color display helps interpret these relative levels.
Metal objects can interfere with the electromagnetic field used by the moisture meter, leading to inaccurate readings. Maintaining a safe distance ensures the measurement is focused on the material's moisture content.
Ensure a 9V battery is correctly installed and has sufficient charge. Check the battery contacts for corrosion.
Ensure you are holding the device at a safe distance from metal objects. Recalibrate the device by holding the calibration button for 5 seconds. Ensure the surface being tested is clean and free of debris.
The area may be genuinely dry. Test the device on a known damp surface or recalibrate. Ensure the sensor pad is making good contact with the surface being tested.
Check if the device is muted (if applicable) or if the battery is low. If the battery is new and the device is not muted, the alarm may be malfunctioning.
Setup:
Compatibility:
Care:
