Motion Activated Sensor - TAUOH - Z5M16598
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This TAUOH Z5M16598 motion-activated sensor is ideal for users looking to automate low-voltage lighting, offering convenience through automatic PIR motion detection. Its key benefit is hands-free lighting activation, with a potential caveat being the need for careful adjustment of sensitivity and range for optimal performance. The sensor features flexible timing, adjustable sensitivity, and a wide input voltage range, making it suitable for various LED strip and low-voltage lighting projects.
All features
| Model Part Number | Z5M16598 |
|---|---|
| Brand | TAUOH |
Extended Product Information
FAQs
What is the maximum range of motion detection?
The exact maximum range is adjustable via the 'RANGE' setting on the sensor. Consult the physical unit for specific dial markings or experiment to find the optimal range for your installation.
How long can the light stay on after motion stops?
The light can stay on for a duration that is flexibly adjustable from 2 seconds up to 360 seconds (6 minutes) after the last detected motion.
Can this sensor be used with standard household AC lights?
No, this sensor is designed for low-voltage DC applications (5V-24V) and cannot be used with standard AC household lighting. Using it with AC power can damage the sensor and pose a safety risk.
What is the maximum current this sensor can handle?
The sensor has a maximum load capacity of 5 Amperes (5A). Ensure your connected lighting does not exceed this limit.
How do I adjust the sensitivity and time settings?
The sensor typically features small dials or potentiometers labeled 'SENS' (sensitivity), 'RANGE', and 'TIME' for adjustment. Use a small screwdriver or a similar tool to carefully turn these dials to your desired settings.
Is this sensor suitable for outdoor use?
The product description does not specify outdoor ratings. It is generally recommended for indoor use unless it is explicitly stated to be weatherproof or waterproof. Protect it from direct exposure to rain and moisture if used in less controlled environments.
Troubleshooting
Light does not turn on when motion is detected.
Verify that the sensor is properly powered (5V-24V DC). Check that the input and output wiring are correctly connected to the power source and the lights. Ensure the sensitivity and range settings are adequate for the detection area.
Light stays on continuously or does not turn off.
Check for continuous motion or heat sources within the detection range that might be triggering the sensor. Adjust the sensitivity and range settings. Ensure the 'TIME' dial is not set to its maximum continuous-on state if such a setting exists.
Light turns on and off erratically.
Reduce the sensitivity or range settings. Ensure there are no environmental factors (e.g., drafts, moving objects like curtains, or heat fluctuations) causing false triggers. Check wiring for loose connections.
Low light output or flickering.
Confirm that the connected lights do not exceed the sensor's 5A maximum load. Ensure the power supply is adequate for both the sensor and the lights. Check all connections for secure contact.
Pros and Cons
Pros
- Automates lighting based on presence, enhancing convenience and energy saving.
- Customizable settings allow for precise control over light duration and detection.
- Broad voltage compatibility makes it versatile for many low-voltage projects.
- Simple to install, requiring minimal technical expertise.
- Reliable motion detection for hands-free operation.
Cons
- Requires careful adjustment of sensitivity and range to avoid false activations or missed detections.
- Best suited for low-voltage DC applications, not compatible with mains voltage.
- Timing settings are fixed within a range, may not suit all specific duration needs.
- Manual provided might be basic, requiring some user experimentation.
Setup, Compatibility & Care
Setup:
- Wiring: Connect the sensor's input terminals to your low-voltage power source (5V-24V DC) and the output terminals to your LED strip lights or other low-voltage lighting.
- Power Connection: Ensure the power supply is appropriate for the voltage and current requirements of both the sensor (max 5A) and your lights.
- Placement: Position the sensor where it has a clear line of sight to the area intended for motion detection.
- Adjustments: Use the dedicated knobs or switches on the sensor to adjust the `TIME` (duration light stays on), `SENS` (sensitivity), and `RANGE` (detection distance).
Compatibility:
- Input Voltage: 5V to 24V DC.
- Load: Maximum 5A.
- Applications: Ideal for LED strip lights, LED modules, and other low-voltage DC lighting systems.
- Not Compatible: Does not support AC power or lighting systems exceeding the 5A load capacity.
Care:
- Keep the sensor's detection lens clean from dust and debris using a dry or slightly damp, soft cloth.
- Avoid exposing the sensor to excessive moisture or extreme temperatures unless it is specifically rated for such conditions.
- Ensure all connections remain secure to prevent intermittent performance.