Best current price£4.11from The Range
Shopping.co.uk recommended and popular offers
The Range£4.11Visit shop Jcp Fixings Sds+ Drill Bit - 6.0Mm X 110Mm, 2 Cutting Edges - Silver
Visit shop30 offers from £4.11 - £18.04
View price history by clicking the chart icon.
The JCP Fixings 6.0mm x 200mm SDS+ Drill Bit is designed for professional contractors and serious DIY enthusiasts who require a reliable tool for masonry and concrete applications. Its primary benefit is the dual-cutting edge design which ensures efficient debris removal and extended service life during heavy-duty tasks. Users should note that this bit is specifically optimized for SDS+ chuck systems and is not compatible with standard three-jaw drill chucks.
| Model Part Number | 1427732 |
|---|---|
| Brand | JCP Fixings |
No, this bit is designed exclusively for SDS+ rotary hammer drill chucks.
It is optimized for masonry, concrete, and stone applications.
Avoid hitting embedded metal rebar in concrete, as this can chip or damage the carbide tip.
No, this is a masonry drill bit and is not suitable for wood or metal.
The bit has a 6.0mm diameter and an overall length of 200mm.
The dual-edge design improves the drilling rate and ensures a more balanced, centered hole.
Verify that the SDS+ shank is fully seated in the chuck and that the locking collar has returned to the closed position.
Check if the drill is set to 'hammer' mode; SDS+ bits require percussion action to cut masonry effectively.
Ensure the hole is clear of masonry dust. Pull the bit out frequently during operation to clear the flutes.
To install, simply pull back the locking collar on your SDS+ drill chuck, insert the bit until it clicks into place, and release the collar. Ensure the shank is locked before starting the motor. This bit is strictly for use with SDS+ rotary hammers. After use, inspect the carbide tip for signs of wear or chipping. Store the bit in a dry environment and apply a light coat of machine oil to the shank to prevent corrosion over extended periods of inactivity.
