Jenolite Rust Converter Trigger Spray - 500ml - Purple

Drying time varies depending on environmental conditions. Refer to the product label for specific instructions, but generally, allow several hours for complete drying before painting.

Jenolite is designed for use on rusted metal. It is not intended for use on painted surfaces, as it may damage the existing paint.

Yes, it is recommended to remove loose rust, dirt, and grease using a wire brush or sandpaper before applying Jenolite for best results.

You can paint directly over the treated surface with most modern paints. However, it's always a good idea to test a small area for compatibility first.

Jenolite is water-based, making it relatively safe. However, avoid contact with skin and eyes, and use in a well-ventilated area. Always follow the safety instructions on the product label.

Store Jenolite in a cool, dry place, away from direct sunlight and heat.

The treated surface will typically turn black or purple after the rust is converted, making it ready for painting.

Jenolite can be used on your car's exhaust system but be aware of the heat resistance of the paint you will be using. Always ensure the surface is cool before applying.

Ensure thorough surface preparation before application and consider multiple coats for heavily rusted areas. Also, ensure the paint used is compatible and provides adequate protection.

Clean the nozzle after each use. If clogged, rinse with water and ensure the product is stored correctly.

Apply in even, thin coats, ensuring full coverage. Avoid spraying too much product in one area to prevent runs or drips.