Best current price£0.57from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£0.57Visit shop WAGO 250-402 2 Pole 2.5mm 4A 45° Push Button PCB Terminal Block Grey
Visit shop2 offers from £0.57 - £12.48
View price history by clicking the chart icon.
The WAGO 250-406 is an ideal solution for engineers and hobbyists requiring reliable, compact wire-to-board connectivity in space-constrained electronics projects. Featuring a 6-pole configuration and intuitive push-button mechanism, this terminal block streamlines installation through its push-in CAGE CLAMP S technology, though users should note it is specifically designed for 24-20 AWG wire sizes and requires precise handling for smaller gauge conductors.
| Model Part Number | 250-406 |
|---|---|
| Brand | WAGO |
The WAGO 250-406 is rated for currents up to 4A, so it should be used for low-power signal or control applications, not high-current power distribution.
No, it features a push-button mechanism, so it is designed to be used without any special screwdrivers or tools.
The pin spacing is 2.5mm.
Yes, solid conductors can be inserted directly using the push-in method without touching the buttons.
The device is rated for temperatures between -60°C and 105°C.
The 250-406 is a 6-pole terminal block; however, terminal strips can be requested with spacers if specific configurations are needed.
Verify the wire gauge is within the 24-20 AWG range and ensure the wire end is stripped to the proper length.
Ensure the push-button is fully depressed before inserting the wire to open the clamp mechanism completely.
Confirm the test pin diameter is exactly 1.3mm and that it is inserted vertically into the designated test port.
To install the 250-406, ensure your PCB layout accommodates the 2.5mm pin spacing. When using solid conductors, simply push the wire directly into the terminal for an automatic connection. For fine-stranded conductors, depress the integrated push-button fully before inserting the wire, then release the button to lock the connection in place.
