Quick Drying Undercoat - White

No, this undercoat is designed for interior use only.

Coverage depends on the surface porosity and application method. Refer to the product label for specific details.

Yes, but ensure the existing paint is in good condition, clean, and properly prepared with a light sanding if needed.

This undercoat is compatible with most water-based and oil-based topcoats.

Generally, one or two coats of undercoat are sufficient, depending on the surface and the topcoat being used.

Yes, this undercoat is suitable for use on primed metal, including radiators.

Thinning is generally not recommended. However, if necessary, add a small amount of water (as specified on the product label) and stir thoroughly.

Store in a cool, dry place, away from direct sunlight and keep the container tightly sealed when not in use.

Ensure the room temperature is within the recommended range (10-30°C) and the humidity is not excessive. Check for proper ventilation.

Apply the undercoat in thin, even coats. Avoid over-brushing or over-rolling. Ensure you are using the correct application tool.

Ensure the surface is properly prepared by cleaning and sanding as needed. Allow sufficient drying time before applying the topcoat.