Best current price£89.74from eBay
Shopping.co.uk recommended and popular offers
eBay£89.74Visit shop US PRO Tools 110pc Metric Tap And Die Set Kit, 2mm to 18mm, Thread Cutting 2514
Visit shopeBay£99.95Visit shop US PRO 110PC METRIC TAP AND DIE SET Die Handle Tap Wrench Taps Dies 2514
Visit shop4 offers from £89.74 - £99.95
View price history by clicking the chart icon.
This comprehensive 110-piece metric tap and die set from US PRO is designed for professionals and DIY enthusiasts needing to create or repair damaged threads on metric fasteners. Its key benefit is the extensive range of sizes (M2x0.4 to M18x1.5) covering most common needs, ensuring you have the right tool for the job. A potential caveat is that precise control requires practice, especially for beginners. The set includes a vast array of taps, dies, tap wrenches, and die handles, all organized in a durable carrying case for convenience and easy access.
| Model Part Number | B2514 |
|---|---|
| Brand | us pro |
The set includes metric thread sizes ranging from M2x0.4 (smallest) to M18x1.5 (largest).
Yes, the set includes both taps (for creating internal threads) and dies (for creating or repairing external threads).
For taps, it is recommended to use tapping fluid or a suitable cutting oil. For dies, a general-purpose cutting oil is recommended.
Always clean the tools after use, apply a light coat of oil to prevent rust, and store them in their original, labeled compartments within the sturdy carrying case.
This set is designed for standard right-hand threads only. It does not include tools for left-hand threads.
A taper tap has a long, gradual lead (about 8-10 threads) and is used to start threading in a blind hole or through hole. A plug tap has a shorter lead (about 3-5 threads) and is used to finish threading in a hole that has already been started with a taper tap.
No, this set is specifically designed for metric (M) thread sizes. Using it on non-metric fasteners could damage the tool and the fastener.
Ensure you are using adequate lubrication (tapping/cutting fluid). Apply steady, even pressure and back off frequently (about a quarter turn) to clear chips. Do not force the tool.
Verify you are using the correct size tap/die for the intended thread. Ensure the tool is perpendicular to the workpiece. Clean the tool and workpiece of any debris. Consider using a guide or jig for straighter starts.
Ensure the tool is properly aligned with the handle's jaws. Loosen the handle's set screws sufficiently before insertion. Make sure no debris is obstructing the tool or handle.
Clean the affected area with a wire brush. Apply a rust inhibitor or light oil. Ensure tools are dried completely after cleaning and lightly oiled before storage.
Setup: The set requires no complex setup. Select the appropriate tap or die for the desired thread size and pitch. Insert it into the corresponding tap wrench or die handle, ensuring it is securely fastened. For taps, use a tapping fluid or lubricant to reduce friction and improve thread quality. For dies, use cutting oil.
Compatibility: This set is exclusively designed for metric threads, ranging from M2x0.4 to M18x1.5. It is not compatible with imperial (SAE) or other thread standards.
Care: After each use, clean all taps and dies thoroughly to remove debris and cutting fluid. Apply a light coat of oil to prevent rust, especially before long-term storage. Store all components back in their designated, labeled slots within the carrying case to maintain organization and prevent damage. Periodically check the case latches for security.
