Best current price£10.40from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.40Visit shop B&Q - Heavy Duty Galvanised T Hinges 16" Pair (Gate Door Shed Barn Cabinet T-Strap)
Visit shop2 offers from £10.40
View price history by clicking the chart icon.
Designed for homeowners and contractors, these SecureFix Direct 16-inch T-hinges are ideal for reinforcing gates, shed doors, and barn entrances requiring heavy-duty hardware. The primary benefit is their robust steel construction combined with a weather-resistant galvanised finish that prevents rust and corrosion. A key caveat to remember is that the set does not include mounting screws or bolts, so users must purchase appropriate fixings separately based on their specific wood thickness and structural requirements.
| Brand | SecureFix Direct |
|---|
These hinges are designed primarily for timber. If using on metal, you would need to drill through the metal and use nuts and bolts, though the design is optimized for wood surface mounting.
The holes have an 8mm diameter, so you should use bolts or screws slightly smaller than 8mm to fit through the holes comfortably.
The galvanised finish is highly resistant to corrosion, but salt-air environments may eventually degrade the coating over many years; periodic inspection is recommended.
This product is sold as a pair, containing two individual T-hinges.
Yes, you can paint them, but you should use a metal-specific primer first to ensure the paint adheres correctly to the galvanised surface.
Check that the hinges are perfectly level and ensure the fixings are fully tightened into solid wood framing.
Apply a spray lubricant to the pin and pivot joint to break up any debris or surface tension.
The screw holes may have widened; move the hinge slightly or use larger diameter coach bolts to secure the plate firmly.
For installation, align the hinges while the door is in the desired position. Use the 8mm diameter holes as a guide for your pilot holes to prevent the wood from splitting. Ensure you use appropriately sized coach bolts or heavy-duty wood screws. To maintain the hinges, periodically check that the bolts have not loosened due to vibration. If the hinge begins to squeak, apply a small amount of exterior-rated grease or silicone-based lubricant to the pivot pin to keep movement smooth. Because the hinges are galvanised, they require minimal maintenance, but you should avoid using abrasive cleaners that might damage the protective zinc coating.
