Kreg Precision Benchtop Router Table - PRS2100

The router table is designed to accommodate a wide variety of routers. Check the manual for specific compatibility information and mounting instructions. The insert plate accepts many large routers.

The Kreg Level-Loc Reducing Rings twist and lock into place. To change them, simply twist the ring until it unlocks, remove it, and insert the desired size. Twist to lock it in.

Yes, the included jointing rods and fence allow the router table to function as a vertical jointer.

The tabletop is made of edge-banded, vibration- and noise-resistant MDF with an Easy-Slide Micro-Dot skin made from high-pressure laminate.

Use a damp cloth to wipe the surface and remove any wood dust or debris. Avoid using harsh chemicals or abrasive cleaners.

Please refer to the Kreg documentation or website for the most up-to-date warranty information.

Additional reducing rings can be purchased from Kreg retailers or directly from the Kreg website.

Check the power cord connection and ensure the outlet is working. Verify the router's power switch is in the 'on' position.

Clean the table surface. Apply a thin coat of paste wax to the table surface to reduce friction.

Ensure the locking levers are fully engaged. Check for any obstructions preventing the fence from locking. Tighten the locking mechanism if necessary.

Ensure the dust collection port is connected to a vacuum or dust collector. Check for any blockages in the port or hose. Adjust the bit guard to optimize dust collection.