Indesit Fully Integrated Dishwasher - 13 Place Settings

Load your dishes, add detergent, and press the Push&Go button. The dishwasher will automatically start a cycle to clean and dry your dishes.

The Quick Wash cycle is designed for lightly soiled dishes and takes approximately 30 minutes to complete.

Remove the filters from the bottom of the dishwasher and rinse them under running water. Use a soft brush to remove any food particles. Refer to the user manual for detailed instructions.

Use a dishwasher detergent specifically designed for automatic dishwashers. Follow the detergent manufacturer's instructions for the correct amount to use.

Select your desired wash program, then use the Delay Start option to set a time for the cycle to begin. The dishwasher will start automatically at the specified time.

The Inner Clean function is a special cycle to help clean the dishwasher itself, preventing build-up and keeping it fresh.

The dishwasher has a capacity of 13 place settings, which is suitable for busy households.

The energy efficiency class is E.

Check that the dishwasher is properly connected to the power supply and that the door is closed correctly. Check the fuse or circuit breaker.

Ensure that the rinse aid dispenser is filled. Check the selected program and choose an appropriate drying setting.

Check that the spray arms are not blocked and the filters are clean. Make sure the dishes are loaded correctly and not obstructing the spray arms. Use the correct amount of detergent.

Check the drain hose for any kinks or blockages. Clean the drain filter located at the bottom of the dishwasher.