Nes Home Flexible Pipe Tails - M10

These pipe tails feature an M10/10mm male connection on one end, designed to connect directly to monobloc taps with corresponding M10 inlets.

The pipework side has a loose nut female end with a standard UK 1/2” BSP fitting, compatible with most common sink and basin water supply pipes.

Yes, the grade 304 stainless steel braiding and secure fittings are designed to handle standard household water pressures reliably.

It is not recommended to cut the flexible pipe tails. Cutting can compromise the integrity of the braid and internal seals, potentially leading to leaks. They are designed to be used at their supplied length.

The fittings are chrome-plated for durability and aesthetic appeal, while the hose itself is made from high-quality grade 304 stainless steel braiding.

Ensure both ends are hand-tightened first, then appropriately tightened with a wrench (for the pipework end) or securely fastened (for the tap end), making sure rubber washers and O-rings are correctly in place and undamaged.

This means the materials used will not degrade over time, releasing harmful substances into your water supply, and will not rust or corrode, ensuring a long lifespan and maintaining water quality.

Ensure the M10 male end is securely tightened onto the tap and that the O-ring is properly seated and not damaged. Re-tighten gently if necessary.

Check that the rubber washer is correctly positioned inside the loose nut female end. Ensure the connection is hand-tightened sufficiently and then given an additional half to one turn with a wrench. Do not overtighten.

Gently flex the pipe tail into the desired position. Avoid sharp kinks or bends, which can damage the internal structure or braiding. If significant force is needed, re-evaluate the alignment of your tap and pipework.

Do not use a damaged pipe tail. Disconnect the water supply and replace the affected hose immediately to prevent leaks or further damage.