VidaXL Hand Lever Shear - 125 mm - Blue

The shear can cut steel sheets up to a maximum thickness of 6 mm.

Yes, it can cut round rods up to a maximum diameter of 11 mm.

No, the shear includes 4 bottom fastening plates for mounting, but the bolts or screws for securing it to a workbench are not included.

The blade is made of hardened steel for durability and cutting performance.

Minor setup is required to securely mount the shear to a workbench. The shear itself comes pre-assembled.

Keep the blade clean and dry, lubricate moving parts periodically, and inspect the blade for sharpness. Store in a dry place.

The blade has a length of 125 mm.

Ensure the material is within the specified thickness limits. Check if the blade is dull or damaged and needs sharpening or replacement. Verify that the material is properly positioned against the blade and cutting surface.

Check for obstructions or debris around the lever mechanism. Lubricate the pivot points and spring mechanism with a suitable lubricant. Ensure the shear is securely mounted, as a wobbly base can make operation harder.

Inspect the mounting screws for the blade and adjust if necessary. Ensure the base plate is not bent. If the damage is significant, the blade may need replacement.

Re-secure the shear to the workbench using the fastening plates. Ensure the mounting surface is robust and flat. Use appropriate hardware for your workbench material.