Minky Opti-Clean Flat Mop

The microfibre mop pad is designed for repeated use and is machine washable. It should be replaced when it shows signs of significant wear or when it no longer effectively picks up dirt, typically after many washes.

The manufacturer does not specify the use of detergents in the clean water tank. For best results and to maintain the integrity of the water separation system and mop pad, it is recommended to use plain water. The microfibre pad is designed to lift dirt effectively on its own.

The approximate dimensions are 153cm in height, 26cm in width, and 20cm in depth.

The scrubbing spikes are integrated into the rinsing mechanism within the bucket. As you rinse the mop pad, the spikes help to dislodge trapped dirt, dust, and hairs from the microfibre material, ensuring a cleaner pad for the next use.

Yes, the Minky Opti-Clean is suitable for most sealed hardwood floors. However, always ensure that excess water is wrung out effectively to prevent damage to the wood finish. Avoid prolonged saturation.

The Minky Opti-Clean features a compact, slimline design that allows for easy storage. You can store it upright or on its side in a cupboard, utility room, or even behind a door.

Ensure the mop pad is properly attached and that the water separation system is functioning correctly. Wash or replace the mop pad if it is heavily soiled or worn.

Check that the tap is aligned correctly with the fill cavity. For draining, ensure the blue plug is fully removed from the base of the dirty water section.

Ensure the mop pad is correctly seated and that the wringing blades are functioning. You may need to pass the wringing blades over the pad an extra time or allow for slightly longer drying time.

Machine wash the mop head at a higher temperature (up to 60°C) and ensure it dries completely between uses. Adding a cup of white vinegar to the wash can help neutralize odors.