12mm Loggers Filing Vice For Use With Chainsaws Dual Points For Driving - Loops

The primary purpose is to provide a stable and secure mount for chainsaw bars, allowing for accurate and efficient chain filing and maintenance.

This vice is designed to fit 12mm chainsaw bars.

Ensure the dual driving points are firmly embedded into a solid piece of wood, such as a log or stump. Tighten the wing nut securely onto the chainsaw bar.

While it can be clamped to a workbench, its design with driving points is optimized for use directly on wood surfaces like logs or stumps for maximum stability in field conditions.

Yes, its robust construction and stable design make it suitable for professional loggers who require reliable tools for chainsaw maintenance.

Clean off sawdust and debris with a brush or cloth. For long-term storage, a light application of oil on metal parts can help prevent rust.

Ensure the wing nut is fully tightened. Check if the chainsaw bar is the correct 12mm size and free of excessive debris that might prevent a flush fit.

Use a hammer or mallet to assist in driving the points into harder wood. Ensure the wood surface is not excessively rotten or soft, which may not provide adequate support.

Check for debris or dirt in the threads of the wing nut and the vice mechanism. Clean the threads and apply a light lubricant if necessary.