My Babiie Infant Carrier and Isofix Base

No, this My Babiie i-Size ISOFIX base is specifically designed and tested for use only with the My Babiie Mbcs02 i-Size Infant Carrier.

i-Size is a European safety standard (ECE R129) for child car seats that focuses on side-impact protection and mandates rear-facing travel for longer. It also uses ISOFIX for easier and safer installation.

No, this ISOFIX base is designed exclusively to connect to your vehicle's ISOFIX anchor points and does not offer a seatbelt installation option.

Most cars manufactured after 2006 have ISOFIX points. Check your vehicle's manual or look for small labels or tags on the car seats, usually located in the crease between the seat back and the cushion.

It is recommended to check the installation periodically, especially after the base has been removed and reinstalled, or if the car has experienced significant temperature changes.

Please refer to the product documentation or My Babiie's official website for the most current warranty information specific to your purchase.

Ensure the ISOFIX connectors on the base are fully extended and properly aligned with the vehicle's anchor points. Check that no obstructions are blocking the vehicle's ISOFIX anchors. Confirm your vehicle is equipped with ISOFIX.

Verify that the infant carrier is correctly aligned with the base's receiving slots. Push down firmly until you hear an audible click and see visual confirmation lights (if applicable). Ensure no debris is present in the connection points.

Re-read the installation instructions in both the vehicle manual and the car seat manual. Ensure both the base to car connection and the carrier to base connection have been made according to the indicators. Disconnect and reconnect if necessary.

Ensure the ISOFIX connectors are fully engaged and locked. Push the base firmly towards the vehicle seat to remove any slack. Check that the vehicle's ISOFIX system is functioning correctly.