Network Cable Tester - TIS - Tis880
Best current price£73.90from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£73.90Visit shop - Tis Tis880 Network Cable Tester
Visit shopB&Q£73.90Visit shop All Offers
3 offers from £73.90 - £78.44
View price history by clicking the chart icon.
TIS 880 Network Cable TesterFree delivery in 1–3 days£78.44Visit shop →
Product Information
Full details
The TIS TIS880 Network Cable Tester is designed for IT professionals, network technicians, and anyone managing Ethernet, LAN, or telephone cabling. Its key benefit is simplifying cable fault identification, saving time and reducing connectivity issues. A potential caveat is its maximum cable length testing limit of 300m. This two-piece handheld device accurately tests UTP, STP, and coaxial cables, performing wire mapping, continuity checks, length measurements, and detecting various faults like shorts, open circuits, and split pairs, all while featuring an easy-to-read LCD display and durable construction.
All features
| Model Part Number | Tis880 |
|---|---|
| Brand | TIS |
Extended Product Information
FAQs
What types of cables can the TIS TIS880 test?
The TIS TIS880 can test UTP, STP, and coaxial cables, supporting Ethernet, LAN, and telephone cables with RJ45 and RJ11 connectors.
How does the two-piece design work?
The main unit is used at one end of the cable, and the remote ID test terminal is connected to the other end. This setup allows a single person to perform tests efficiently.
What is the maximum cable length this tester can measure?
The tester can measure cable lengths from a minimum of 1 meter up to a maximum of 300 meters.
Can it detect shield integrity for shielded cables?
Yes, the TIS TIS880 features shield detection to test the integrity of the cable's shield.
What common wiring faults can it identify?
It can identify open circuits, shorts, mis-wires, reversals, and split pairs.
Does the tester have a display?
Yes, the TIS TIS880 features an easy-to-read LCD display for clear test results.
Is this device suitable for professional use?
Yes, the TIS TIS880 is built with durability in mind for professional use, ensuring long-lasting performance in various environments.
Troubleshooting
Device does not power on.
Ensure fresh batteries are correctly installed in both the main and remote units. Check the battery contacts for cleanliness.
Inaccurate cable length measurement.
Verify that the cable is not damaged and that both ends are properly connected. Ensure the cable meets the minimum length requirement of 1 meter.
Test results show 'open circuit' for a known good cable.
Check the connections at both ends of the cable. Ensure the RJ45 or RJ11 plugs are securely seated and properly terminated.
Display shows 'short' or 'mis-wire' but the cable appears correctly terminated.
Re-terminate the cable ends, ensuring each wire is in its correct position within the connector. Sometimes, subtle damage to the wire insulation can cause shorts.
Remote unit is not detected by the main unit.
Ensure the remote unit is powered on and within the operating range of the main unit. Check for any obstructions or interference.
Pros and Cons
Pros
- Accurately identifies a wide range of cable faults.
- Measures cable length, useful for inventory and planning.
- Supports common network and telephone cable types.
- The two-piece design enhances efficiency for solo technicians.
- Durable construction suitable for professional use.
- Includes a built-in flashlight for convenience.
Cons
- Maximum cable length test is limited to 300 meters.
- Does not support automated tone generation for tracing cables.
- Requires separate batteries for operation.
- May not be suitable for testing complex enterprise network infrastructures beyond basic continuity.
Setup, Compatibility & Care
Setup: The TIS TIS880 is a two-piece system. Connect the main unit to one end of the cable and the remote ID test terminal to the other. Ensure both units are powered on. Select the desired test function using the intuitive button interface.
Compatibility: This tester is compatible with:
- UTP (Unshielded Twisted Pair) cables
- STP (Shielded Twisted Pair) cables
- Coaxial cables
- Ethernet cables (RJ45 connectors)
- LAN cables (RJ45 connectors)
- Telephone cables (RJ11 connectors)
Care: To ensure longevity and accurate performance:
- Store the tester in a dry environment when not in use.
- Clean the units with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Replace batteries promptly when the low battery indicator appears.
- Protect the units from extreme temperatures and physical impact.