Plasplugs Solid Wall Super Grips - Brown

The brown Super Grips are heavy-duty anchors designed for securely fixing items into solid walls like concrete and brick, especially when using larger screws (No.8-14).

No, these anchors are specifically designed for solid wall materials such as concrete and brick. They will not provide adequate support in drywall or hollow block walls.

The brown variant is designed to accept screws ranging from size No.8 up to No.14, which corresponds to diameters of approximately 4.5mm to 7mm.

You need a drill bit suitable for masonry (concrete or brick) of the correct diameter for the anchor. Consult the product packaging or instructions for the exact recommended drill bit size.

The hole depth should be sufficient to accommodate the full length of the anchor. It is recommended to refer to the specific instructions provided with the product for precise depth recommendations.

The color indicates the duty rating and screw size compatibility. The brown version is heavy-duty and accepts larger screws (No.8-14), whereas yellow and red are typically for regular-duty applications with smaller screws.

Ensure the correct size drill bit was used. Re-drill the hole to the specified diameter or clear any debris from the existing hole.

Verify that the screw size is within the recommended range (No.8-14). Check if the hole is too large or if the wall material is compromised. Ensure the anchor is fully seated in the wall.

The hole may be slightly too large. Try a slightly larger screw if within the compatible range, or consider using a different anchoring method.