StoneCare4U Essential Slip-Stop - 2.5L
Boost slip resistance on wet floors with StoneCare4U Essential Slip-Stop, a 2.5L solution for cera...Boost slip resistance on wet floors with StoneCare4U Essential Slip-Stop, a 2.5L solution for ceramic, porcelain, and natural stone surfaces. Ideal for showers and floors, it provides long-lasting protection against slips and falls. Not for use on vinyl, linoleum, wood, metal, or coated surfaces. Before application, remove loose debris and wear safety gear (gloves, eyewear, mask, protective clothing). Test in an inconspicuous area first to check suitability and effectiveness. Ensure the surface is clean of dirt, grease, and oil. Apply in small sections using a mop, sponge, or cloth. Agitate the wet surface with a stiff brush and let stand for 3-10 minutes (3-10 minutes for ceramic/porcelain, 5-10 minutes for natural stone, adjust dwell time based on your test patch). Rinse each section immediately, do not let the product dry. Reapplication is possible. Maximum slip resistance is attained within 3-10 minutes. It microscopically treats ceramics, porcelain, and natural stone to greatly improve slip resistance on wet floor areas. For instance, the Essential Slip-Stop can be used on ceramic, porcelain & natural stone floors & showers and, importantly, improves slip-resistance on wet floors, providing long-term slip or fall accident protection. However, be aware that it is unsuitable for vinyl, linoleum, wood, metal or coated surfaces. Protect areas not to be treated, as Essential Slip-Stop can cause permanent damage if accidentally spilt or applied to sensitive surfaces, such as metals, painted surfaces, woods, glazed surfaces etc. When properly applied and maintained, the treated floor will have a slip coefficient exceeding slip-fall safety standards. Coverage: Up to 15 m² per litre; must be used neat and not diluted. KEEP OUT OF THE REACH OF CHILDREN & PETS. Enhance slip resistance on wet floor surfaces with the StoneCare4U Essential Slip-Stop 2.5L. Suitable for use on ceramic, porcelain, and natural stone floors and showers, effectively improving slip resistance on wet floors for long-lasting protection against slip and fall accidents. It is important to note that this product is not suitable for vinyl, linoleum, wood, metal, or coated surfaces. How to apply: First, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. A small test application in an inconspicuous area before use is recommended. This will indicate the suitability and effectiveness of the product for your surface. Importantly, ensure the surface is free from dirt, grease and oil before starting. Essential Slip-Stop needs to be applied in small sections. A mop, sponge or dry cloth is most commonly used. The wet surface must be agitated with a stiff brush and left to stand for 3 to 10 minutes. Most importantly, Do not let the product dry on the surface. Subsequently, rinse clean with water when each area is completed and move on to the next area to be treated. Maximum slip resistance is attained within 3 to 10 minutes. This time will depend on how hard the surface material is. Bear in mind that you can always reapply if necessary. Dwell time: 3 to 10 minutes for ceramic or porcelain tiles, shower trays and baths. Dwell time: 5 to 10 mins for natural stone and masonry. Indeed, a test patch must be completed before use to determine the dwell time required, as the above times can only be a guide.
Best current price£51.72from Building Materials
Best offers
Shopping.co.uk recommended and popular offers
Building Materials£51.72Visit shop ›Essential Slip-Stop Anti-Slip Treatment - 2.5L
Visit shop ›
B&Q£51.95Visit shop ›- Stonecare4USlip-Stop (2.5L)Anti-Slip For Internal CeramicPorcelain & Natural Stone FloorsSlip Resistance & Anti Slip
Visit shop ›
