Greenwood Airvac SF90T Centrifugal Extractor Fan - Timer

Remove the filter from the fan and wash it with warm, soapy water. Allow it to dry completely before re-inserting it.

Consult the product manual for instructions on adjusting the timer settings. There is usually a dial or switch inside the fan housing.

The fan requires a 3-wire connection: permanent live, switched live, and neutral.

The product manual should have come with the fan at purchase. You can also likely find a copy of it online from the manufacturer's website.

The extraction rate is 21 litres per second (75m3 per hour).

Yes, the pullcord can be removed if not required.

The dimensions are 187mm wide x 142mm high x 142mm deep, with a 100mm exhaust.

The back draught shutter prevents outside air from entering the room when the fan is off.

Check the electrical connections and ensure the power supply is working. Check the fuse or circuit breaker.

Verify the 3-wire connection (permanent live, switched live, and neutral). Ensure the timer settings are correctly adjusted.

Check for obstructions in the fan or ducting. Clean the fan blades and filter. Ensure the fan is securely mounted.

Clean or replace the filter. Check for blockages in the ducting. Ensure the back draught shutter is functioning correctly.