Timco Panel Pins - Bright - 30 X 1.60 - Silver

These pins are primarily used for light-duty applications such as cabinet making, furniture assembly, and attaching thin mouldings where a discreet fastener is required.

No, these panel pins have a bright, unplated finish and are intended for indoor use only. They are susceptible to rust and corrosion in damp or outdoor environments.

There are approximately 1900 pins per kilogram, meaning a 0.5kg pack would contain roughly 950 pins.

Yes, if your nail gun is compatible with 1.60mm diameter pins. Always check your tool's specifications and test on scrap material.

Bright nails are self-coloured and unplated, offering a basic finish suitable for indoor use. Plated nails (e.g., galvanized) have a protective coating for enhanced corrosion resistance, making them suitable for more demanding environments.

Store the pins in a dry, cool place, keeping the container sealed when not in use to prevent moisture exposure and minimize tarnishing.

This specific pin has a shank diameter of 1.60mm and a length of 30mm.

Ensure you are hammering straight and the surface material is not too hard. For nail guns, check pressure settings and ensure the nail is entering the wood correctly.

Verify the pin length is appropriate for the combined thickness of the materials being joined. Ensure the material is dense enough to hold the pin.

Use a nail set tool to recess the pin head slightly below the surface for a cleaner finish. Alternatively, use a pin specifically designed for countersinking if available.

This is normal for bright finish nails stored in humid conditions. Clean gently with a dry cloth. For minor spots, a very fine steel wool might be used cautiously on untreated wood, but avoid if the surface is finished.