Best current price£34.00from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£34.00Visit shop Floplast Grey Ring Seal Soil Pipe Single Socket - 110Mm X 4Mtr
Visit shop1 offer from £34.00
View price history by clicking the chart icon.
The FloPlast 110mm PVC soil and vent pipe is the ideal solution for plumbing professionals and homeowners tasked with installing or repairing above-ground foul drainage systems in residential and commercial buildings. It excels at facilitating the reliable discharge of waste from bathrooms, kitchens, and utility rooms while ensuring proper ventilation; however, users should note that as a 4-meter rigid pipe, it requires careful planning for transportation and cutting to size on-site.
| Model Part Number | SP4G |
|---|---|
| Brand | FloPlast |
No, this product is specifically designed for above-ground soil and vent applications. Underground systems require different specifications.
The socket is designed to work with the standard FloPlast sealing system; ensure you have the correct seals if they are not pre-installed in your fittings.
You can cut the PVC pipe using a standard fine-toothed hand saw. Ensure the cut is clean and deburr the edge before inserting into a fitting.
While it is designed for the FloPlast system, its 110mm diameter is a common industry standard, though using matching brand components is recommended for the best fit.
It is used for the above-ground discharge of foul drainage and as a ventilation (stench) pipe for drainage systems.
Use pipe lubricant on the spigot end and push the pipe fully into the socket, then pull back approximately 10mm to allow for thermal expansion.
Ensure the pipe end is properly deburred, aligned straight, and that the internal rubber seal is seated correctly and lubricated.
Measure twice and cut using a fine-toothed saw, ensuring the cut is square to the pipe axis for a secure fit.
Installation involves measuring the required run and cutting the pipe using a fine-toothed saw. After cutting, it is essential to deburr the pipe end to ensure it slides smoothly into the socket without damaging the internal seal. Always use a high-quality lubricant on the rubber ring seals within the socket to facilitate easier insertion and prevent displacement. The pipe is compatible with all standard 110mm FloPlast fittings. For care, keep the pipe free from external heavy impacts and perform annual inspections of the joints to ensure seals remain tight and leak-free.
