Best current price£33.99from eBay
Shopping.co.uk recommended and popular offers
eBay£33.99Visit shop CK Tools T2953 Vorteck Fast Flat Wood Drill Bits - Set of 9
Visit shop
Amazon£60.52Visit shop C.K Tools Vorteck Fast Flat Wood Drill Bit Set of 9, 12–32mm, Threaded Self-Driving Tip, Impact Rated 1/4" Hex Quick Lock Shank, Heat Treated Carbon Steel, Case Included CK T2953
Visit shop3 offers from £33.99 - £60.52
View price history by clicking the chart icon.
The C.K Vorteck 9 Piece Fast Flat Wood Drill Bit Set (T2953) is a high-performance solution for professional tradespeople and serious DIYers who need to drill large holes in timber quickly and accurately. Its primary benefit is the threaded self-driving tip, which pulls the bit through the wood with minimal physical effort, though users should note that the aggressive pull requires a stable drill grip to prevent 'grabbing' in softer wood types.
| Model Part Number | T2953 |
|---|---|
| Brand | C.K |
Yes, they are compatible with both standard drill chucks and impact drivers using the 1/4 inch hex system.
The set includes a maximum diameter of 32mm.
No, these are specifically designed for wood applications only.
You can use a small fine-grit file on the cutting edges; avoid damaging the threaded self-driving tip.
Yes, the heat-treated steel is capable of cutting through hardwoods, though it will naturally be slower than in softwoods.
Reduce the drill speed or apply slightly less pressure to allow the bit to clear debris from the hole.
Drill until the tip just protrudes from the other side, then finish the hole from the opposite direction.
Switch your drill to reverse mode and pull straight back while slowly engaging the trigger.
To set up the bits, simply insert the 1/4 inch hex shank into your impact driver or drill chuck and ensure the locking mechanism is fully engaged. These bits are fully compatible with any standard hex quick-change holder. Regarding care, clean the bits after each use to remove wood resin and debris, which can accumulate in the flute and slow down performance. While the bits are corrosion-resistant, storing them in the provided case will prevent moisture buildup and help maintain the sharpness of the cutting edges. Periodically inspect the self-driving tip for burrs or damage; if the tip becomes blunt, it can be carefully touched up with a small file.
